| Sl No |
Material Category |
Description |
Annual Business Value in Rs. Lakhs |
| 1 |
GT.GA.038 |
HOIST TROLLEY |
1.52 |
| 2 |
TC.RM.011 |
ALUMIMIUM ALLOY SHEETS |
0.2 |
| 3 |
H.SD.171 |
SHALE SHAKERS |
280 |
| 4 |
H.SD.172 |
LMMC |
720 |
| 5 |
H.SD.041 |
FLEXIBLE COUPLINGS (TYRE TYPE). |
10 |
| 6 |
LT.SD.011 |
TURBINE INSULATION |
30 |
| 7 |
H.SD.190 |
HP VALVES & FITTINGS |
320 |
| 8 |
H.SD.038 |
EZY TORQUE. |
20 |
| 9 |
CM.SD.004 |
MULTIMEMBRANE COUPLINGS |
1 |
| 10 |
C.IM.008 |
MOTIVAL, ACCELERATOR BASE B1051, PHENOXYL RESIN AND ACCELERATOR |
5.0 |
| 11 |
C.IM.010 |
PHENOLIC CORE PLATE VARNISH, CPV-4000 |
12.0 |
| 12 |
C.IM.011 |
RUTAPOX-0164 |
5.3 |
| 13 |
C.IM.015 |
EPOXY REDGEL (REDGEL+ HARDNER+THINNER+DILUENT "C") |
5.0 |
| 14 |
C.IM.016 |
RED/GREY INSULATING ENAMEL VARNISH AA27513 |
5.0 |
| 15 |
C.IM.017 |
PATTEX P80 |
5.0 |
| 16 |
C.IM.030 |
THINNER-205 (THINNER FOR CPV-4000) |
10.6 |
| 17 |
C.IM.035 |
SILICON PASTE |
5.0 |
| 18 |
C.IM.046 |
PAINT REMOVER (ORION - 86) |
5.0 |
| 19 |
C.IM.048 |
RTV 732 |
5.0 |
| 20 |
C.IM.050 |
RTV SILASTOMER 3110 |
5.0 |
| 21 |
C.IM.054 |
UNMILLED FLEXBLE MICANITE |
5.0 |
| 22 |
C.IM.061 |
RESIN POOR MICA GLASS TAPE (0.15 X 40), ZINC NAPTHANATE TREATED KUN 5644 |
90.4 |
| 23 |
C.IM.063 |
FOM MICANITE (F-CLASS) KUN 5631 |
18.3 |
| 24 |
C.IM.066 |
PREPREG GLASS CLOTH, SIZE: 0.15 THK AA25701 |
5.0 |
| 25 |
C.IM.073 |
POLYGLASS BANDAGE TAPE BP25792 |
6.1 |
| 26 |
C.IM.077 |
POLYSTER SINGLE SIDE ADHESIVE TAPE, 0.05 X 25 MM |
5.0 |
| 27 |
C.IM.080 |
POLY PROPELENE TAPE, PETSIL-D2, 0.05 X 30 |
5.0 |
| 28 |
C.IM.088 |
POLYSTER CONDUCTING FLEECE 0.09 X 60 MM KUN 5643 |
25.8 |
| 29 |
C.IM.091 |
GLASSOFLEX TAPE 0.21 X WIDTH HY22462 |
17.4 |
| 30 |
C.IM.092 |
GLASSOFLEXSHEET 0.21 X 1000 HY22462 |
38.3 |
| 31 |
C.IM.093 |
NOMEX PAPER, (0.14, 0.18, 0.25, 0.5 THK DUPONT 410 GRADE) AA22901 |
16.0 |
| 32 |
C.IM.094 |
NOMEX BOARD, 4MM & 6 MM THK |
27.4 |
| 33 |
C.IM.100 |
PHENOLIC COTTON FABRIC SHEET |
5.0 |
| 34 |
C.IM.106 |
EPOXY GLASS CLOTH BASED TUBES, RODS , BUSHINGS & INSULATING ANGLE |
5.0 |
| 35 |
C.IM.109 |
INSULATION UNDER WEDGE HGL STRIP AA22415 |
5.0 |
| 36 |
C.IM.112 |
ROTOR SLOT TROUGHS AA22415 |
76.4 |
| 37 |
C.IM.114 |
POLYSTER RESIN MAT HW25796 |
5.0 |
| 38 |
C.IM.117 |
GLASS FIBRE CORD DIA 30 AND DIA. 20 (ZINC NAPHTENATE TREATED) (FOR 2 POLE M/C) 47116-0081 |
11.7 |
| 39 |
C.IM.119 |
BANDAGE RING (FOR STATOR WINDING) |
5.0 |
| 40 |
C.IM.120 |
AIR GUIDE, WINDING SHIELDS SUPPORT RINGS |
5.0 |
| 41 |
C.IM.122 |
SEMI CONDUCTING TAPE (SILICONE CARBIDE TREATED) 0.22 X 22 47116-0044 |
5.7 |
| 42 |
C.IM.130 |
SELF FUSING TAPE HY25164 |
5.0 |
| 43 |
C.IM.131 |
TRIVOLTHERM-N |
5.4 |
| 44 |
C.IM.136 |
TREATED TRIVOL THERM TAPE & VS 384.4, TREATED NOMEX TAPE NX 360.1 |
9.5 |
| 45 |
C.IM.137 |
HYLOMAR PASTE |
5.0 |
| 46 |
C.IN.027 |
HUMIDITY METER TADS 145 |
5.0 |
| 47 |
C.CO.007 |
COMPLETE BEARINGS |
100.8 |
| 48 |
C.IN.029 |
GROUNDING BRUSH MONITOR |
7.1 |
| 49 |
C.FO.011 |
BABBITTED SEALING RINGS |
5.0 |
| 50 |
C.IN.032 |
BUS COUPLER WITH ACCESSORIES |
17.6 |
| 51 |
C.RM.002 |
NMS FLATS X120MN12 FLATS HY10570 |
11.7 |
| 52 |
C.RM.003 |
NMS ROUNDS X40MN CR.(N) 19K HY10571 |
17.0 |
| 53 |
C.RM.010 |
FINE MICA PAPER COVERED COPPER CONDUCTORS WITH BHEL MATLS. RESIN POOR MICA TAPED CONDUCTORS |
56.7 |
| 54 |
C.RM.012 |
SILICON STEEL SHEETS M196 TO M45 M36, M27 |
384.8 |
| 55 |
C.IM.001 |
BISPHENOL EPOXY IMPREGNATING RESIN KUN 5601 |
44.2 |
| 56 |
C.RM.014 |
COPPER ROUNDS |
6.4 |
| 57 |
C.RM.015 |
BRASS ROUNDS & HEXAGONS |
5.0 |
| 58 |
C.RM.018 |
FLUX COATED SILVER BRAZING RODS IS-2927 |
54.8 |
| 59 |
C.RM.024 |
ROTOR WEDGE PROFILES ALZNMG CU 5-F52 |
29.5 |
| 60 |
C.RM.026 |
SCRAPER FIN PROFILE |
8.0 |
| 61 |
C.RM.028 |
CU. FLEXIBLES |
17.4 |
| 62 |
C.RM.032 |
NICKEL AL. POWDER |
5.0 |
| 63 |
C.RM.035 |
FLUX COATED SILVER BRAZING ROD(LOW SILVER) |
5.0 |
| 64 |
C.RM.036 |
POLE COILS |
26.5 |
| 65 |
C.RM.038 |
STATOR BARS / COILS |
30.7 |
| 66 |
C.SD.005 |
CO2 FIRE EXTINGUISHING EQPT. CO2 EQUIPMENT |
41.4 |
| 67 |
C.SD.010 |
DIGITAL AUTOMATIC VOLTAGE REGULATOR ANALOG AUTOMATIC VOLTAGE REGULATOR |
64.0 |
| 68 |
C.SD.024 |
DIAPHARAM VALVES |
5.0 |
| 69 |
C.SD.030 |
PRESSURE REGULATORE/REDUCERS |
5.0 |
| 70 |
C.SD.040 |
VITON PROFILES VITON "O" RINGS (UNDER H2 PR. CRITICAL) |
5.0 |
| 71 |
C.SD.055 |
STROBOSCOPE (FIXED/PORTABLE) |
5.0 |
| 72 |
C.SD.056 |
DIODES (FOR COUPLED & OH TYPE B/L EXCITERS) |
96.3 |
| 73 |
C.SD.057 |
FUSE (FOR COUPLED) |
46.4 |
| 74 |
C.SD.058 |
SPACE HEATERS |
5.0 |
| 75 |
C.IM.002 |
ARALDITE CY-230 AA27602 |
5.0 |
| 76 |
C.SD.060 |
RUBBER SHEETS |
5.0 |
| 77 |
C.SD.063 |
ON LOAD BRUSH GEAR 3-423-20-31006 |
5.0 |
| 78 |
C.SD.066 |
DOUBLE BRUSH HOLDER |
5.0 |
| 79 |
C.SD.068 |
R.C. BLOCK |
5.0 |
| 80 |
C.SD.069 |
PERMANENT MAGNET (FOR COUPLED TYPE BL EXCITER) |
9.5 |
| 81 |
C.SD.070 |
TEFLON & SILICON INSULATED COPPER CABLES |
5.0 |
| 82 |
C.SD.071 |
PMG FOR OVERHANG B/L EXCITERS 3000 RPM & MAGNET CATRIDGE. |
5.0 |
| 83 |
C.SD.072 |
TRAPEZOIDAL RUBBER PROFILES |
5.0 |
| 84 |
C.IM.005 |
B-STAGE EPOXY RESIN, SIB -775 (4302) AA27522 |
5.0 |
| 85 |
C.SD.075 |
VAPOUR EXTRACTION FAN |
5.0 |
| 86 |
C.SD.080 |
AIR FILTER (PANEL TYPE) |
5.0 |
| 87 |
C.SD.083 |
GT + GTG WALKWAYS STAIR CASES |
5.0 |
| 88 |
C.IM.006 |
B-STAGE EPOXY RESIN, SIB -475 COMP A (4302) |
5.0 |
| 89 |
C.SD.084 |
PRESS TOOLS BLANKING COMPOUND TYPES |
28.8 |
| 90 |
C.SD.086 |
AIR FILTER HOT AIR DUCT ASSLY AND MISC. DUCTS |
5.0 |
| 91 |
C.SD.088 |
ROLLER TRUCK |
5.0 |
| 92 |
C.SD.091 |
AL. OXIDE CLOTH ABRASIVE BELT |
5.0 |
| 93 |
C.SD.093 |
VIBRATION 30 FEET CABLE |
5.0 |
| 94 |
C.SD.094 |
DISC MILLING CUTTERS, S-EMT-090 |
5.0 |
| 95 |
C.SD.096 |
D.C.MAGNET |
5.0 |
| 96 |
C.SD.097 |
BAR IMPREGNATION FIXTURE |
5.0 |
| 97 |
C.SD.098 |
PILOT EXCITER FOR B/L EXCITER - 1500 RPM |
8.2 |
| 98 |
C.SD.099 |
STATIC FREQUENCY CONVERTER |
5.0 |
| 99 |
C.SD.100 |
SPACE HEATER CONTROL PANEL |
5.0 |
| 100 |
C.SD.102 |
AIR FILTER STATIC (MAKE UP FILTER) |
5.0 |
| 101 |
C.SD.103 |
FUSE FOR O.H. TYPE B/L EXCITER |
5.0 |
| 102 |
C.SD.104 |
VARISTOR |
5.0 |
| 103 |
C.SD.108 |
GENERATOR OUTPUT COUPLING |
5.0 |
| 104 |
C.SD.112 |
CARRIER SECTION |
5.0 |
| 105 |
C.SD.114 |
SILICON RUBBER INSULATED CABLE |
5.0 |
| 106 |
C.SD.117 |
GENERATOR PACKAGE |
5.0 |
| 107 |
C.SD.118 |
RELAY TEST KIT |
5.0 |
| 108 |
C.SD.120 |
HYDRAULIC JACK, PUMP AND ITS ACCESSORIES |
5.0 |
| 109 |
C.SD.121 |
SHIELDING BAR |
5.0 |
| 110 |
C.SD.122 |
GENERATOR AIR COOLER ASSEMBLY |
90.0 |
| 111 |
C.SD.123 |
WOODEN BLOCKS/COMPONENTS |
5.0 |
| 112 |
D.FO.006 |
TUBE PLATE ( NON FERROUS ) |
5.0 |
| 113 |
D.GA.001 |
HIGH PRESSURE FEED WATER HEATERS |
5749.1 |
| 114 |
D.PT.005 |
STAINLESS STEEL (U-TUBES) - HEAVIER THAN 14 BWG (MIN) |
1037.4 |
| 115 |
D.PT.007 |
LOW FIN STRAIGHT & "U" TUBE (FERROUS) |
21.8 |
| 116 |
D.PT.011 |
LOW FIN STRAIGHT & "U"TUBES (NON FERROUS) |
5.0 |
| 117 |
D.SD.002 |
ATMOSPHERIC RELIEF VALVE ( SURFACE CONDENSER) |
17.0 |
| 118 |
D.SD.004 |
CONDENSER SPRING |
5.0 |
| 119 |
D.SD.008 |
ON LOAD TUBE CLEANING SYSTEM (SPONGE BALL TYPE) |
5.0 |
| 120 |
D.SD.015 |
SPRAY VALVES FOR DEAERATORS (FOR NTPC PROJECTS) |
5.0 |
| 121 |
D.SD.019 |
TUBE SUPPORT ( LAMINATED WOOD ) |
5.0 |
| 122 |
D.SD.021 |
NAME PLATE |
5.0 |
| 123 |
D.SD.027 |
HTD BELTS & PULLEYS FOR CWM |
5.0 |
| 124 |
D.SD.034 |
SEPERATOR AND SEPERATOR ELEMENTS |
5.0 |
| 125 |
D.SD.038 |
AXIAL FLOW IMPELLER |
5.0 |
| 126 |
D.SD.051 |
PLATE TYPE HEAT EXCHANGER |
5.0 |
| 127 |
D.SD.052 |
DOUBLE CONE PACKING WITH ALUMINIUM COVERINGS |
5.0 |
| 128 |
D.SD.054 |
HALF TUBE SUPPORTS (ALUMINIUM) |
5.0 |
| 129 |
D.SD.057 |
TURBULANT PROMOTORS |
5.0 |
| 130 |
D.SD.058 |
AIR COOLER/HYDROGEN COOLER |
5.0 |
| 131 |
D.SD.060 |
ELECTRONIC LEVEL SWITCH |
5.0 |
| 132 |
D.SD.061 |
TRAY ASSEMBLES FOR DEAERATORS (FOR NTPC PROJECTS) |
51.0 |
| 133 |
D.SD.062 |
CONDUCTIVITY LEVEL GAUGE |
5.0 |
| 134 |
D.SD.571 |
INSULATING MATL. |
13.7 |
| 135 |
D.SD.573 |
STRUCTURALS FOR COOLING WATER MODULE, AIR BLAST OIL COOLERS, AIR COOLERS & HEAT EXCHANGERS |
5.0 |
| 136 |
D.SD.574 |
RUBBER EXPANSION BELOWS |
5.0 |
| 137 |
GT.CO.006 |
DUCTILE IRON CASTINGS (SEAL STATIONERY ETC.) STATIONARY ETC |
5.0 |
| 138 |
GT.CO.007 |
INVESTMENT CASTINGS FOR FR 9E NOZZLES |
5.0 |
| 139 |
GT.CO.008 |
SHROUD CASTINGS |
5.0 |
| 140 |
GT.CO.009 |
CASING CASTINGS (SG & GI CASTINGS FOR INLET, CDC, TURBINE CASINGS OF FR5&6 AND ALL CASTINGS OF FR 6F |
39.6 |
| 141 |
GT.CO.010 |
FR-5 NOZZLES AND BUCKET CASTING |
5.0 |
| 142 |
GT.CO.011 |
FR-6B BUCKET AND NOZZLE CASTINGS |
1330.6 |
| 143 |
GT.FO.006 |
ALUMINIUM FORGINGS |
1.2 |
| 144 |
GT.GA.003 |
AIR FILTERS FOR VENT FAN |
5.0 |
| 145 |
GT.GA.007 |
GT ENCLOSURES OFF BASE ( * UNDER DEVELOPMENT) |
5.0 |
| 146 |
GT.GA.008 |
CONTROL COMPARTMENT |
5.0 |
| 147 |
GT.GA.009 |
GT ACCOUSTIC WALL |
5.0 |
| 148 |
GT.GA.011 |
TUBE FITTINGS (SWAGE LOK TYPE) |
111.8 |
| 149 |
GT.GA.012 |
TUBE FITTINGS (SWAGE LOK MAKE) |
100.1 |
| 150 |
GT.GA.021 |
AIR DRYING UNIT (WITHOUT COOLER) |
5.0 |
| 151 |
GT.GA.022 |
COOLER FOR AIR DRYING KIT |
10 |
| 152 |
GT.GA.024 |
VERTICAL OIL PUMP (AOP / EOP)ASSY *ONLY WHEN REQUIRED TO IMPORT **FOR FRAME1 REQUIREMENT ONLY |
30 |
| 153 |
GT.GA.026 |
OIL DRAIN PUMP |
5.0 |
| 154 |
GT.GA.027 |
FIRE PROTECTION EQUIPMENT |
43.2 |
| 155 |
GT.GA.031 |
PIPE (SLIIP JOINT) & VICTAULIC CPLG |
5.0 |
| 156 |
GT.GA.033 |
ELECTRIC MOTORS (EXPLOSION PROOF AC MOTORS) (AOP/EOP/VENT FANS) |
5.0 |
| 157 |
GT.GA.039 |
WATER INJECTION SKID |
5.0 |
| 158 |
GT.GA.040 |
OIL CENTRIFUGE |
10 |
| 159 |
GT.GA.047 |
TUBE AXIAL FANS |
5.0 |
| 160 |
GT.GA.051 |
TUBE FITTINGS-SWAGELOK ALTERNATIVES (IMPORTED) |
5.0 |
| 161 |
GT.GA.052 |
PHYSICAL MODEL OF EQUIPMENT |
16.8 |
| 162 |
GT.GA.054 |
AHP WITH MOTOR(INDIGENOUS) |
5.0 |
| 163 |
GT.GA.055 |
FLEXIBLE HOSES FOR ADVANCE CLASS GTS |
30.0 |
| 164 |
GT.GA.056 |
LUBE OIL CENTRIFUGAL PUMPS |
32.9 |
| 165 |
GT.GA.063 |
CHECK VALVES |
5.0 |
| 166 |
GT.GA.069 |
WATER WASH NOZZLES |
5.0 |
| 167 |
GT.GE.006 |
SPEEDTRONIC MARK IV & MARK V (TURBINE CONTROL PANEL) |
5.0 |
| 168 |
GT.GE.013 |
BATTERY (NICAD) |
5.0 |
| 169 |
GT.GE.014 |
BATTERY (LEAD ACID) |
5.0 |
| 170 |
GT.GE.016 |
SOLENOID VALVE (EXPL. PROOF) |
5.0 |
| 171 |
GT.GE.018 |
SELF ACTUATING, PRESSURE REGULATING VALVE (VPR) |
5.0 |
| 172 |
GT.GE.020 |
VALVE HYD. SOLENOID |
5.0 |
| 173 |
GT.GE.022 |
TEMPERATURE SWITCHES * SPECIAL REQUIREMENT |
10 |
| 174 |
GT.GE.023 |
VIBRATION SWITCH |
5.0 |
| 175 |
GT.GE.033 |
SENSOR ARRGT. EXHT. |
5.0 |
| 176 |
GT.GE.034 |
WIRE MARKERS |
5.0 |
| 177 |
GT.GE.036 |
ELECTRICAL TAPES |
5.0 |
| 178 |
GT.GE.039 |
VIBRATION MONITORING SYSTEM |
94.6 |
| 179 |
GT.GE.049 |
UV FIRE DETECTION SYSTEM |
80 |
| 180 |
GT.GE.050 |
GAS MONITORING SYSTEM |
9.1 |
| 181 |
GT.GE.053 |
TURBINE FLOW METER |
5.0 |
| 182 |
GT.GE.055 |
PLATINUM TEMPERATURE SENSORS |
5.0 |
| 183 |
GT.GE.058 |
PRESSURE TRANSMITTERS AND DP TRANSMITTERS SPECIAL TYPE. |
5.0 |
| 184 |
GT.GE.060 |
GAS MONITORING SYSTEM |
5.0 |
| 185 |
GT.GE.061 |
STATIC START SYSTEM |
17.6 |
| 186 |
GT.GE.062 |
DEW POINT SENSOR |
5.0 |
| 187 |
GT.GE.065 |
LEVEL TRANSMITTERS |
5.0 |
| 188 |
GT.GE.067 |
FLAME DETECTOR |
28.2 |
| 189 |
GT.SD.005 |
FUEL OIL PUMP FOR HSD |
125.6 |
| 190 |
GT.SD.007 |
LOAD COUPLING WITH HARDWARE (FRAME 1) - GEAR TYPE |
5.0 |
| 191 |
GT.SD.008 |
ACCESSORY COUPLING / GEAR TYPE (FRAME 9) |
9.7 |
| 192 |
GT.SD.010 |
LOAD COUPLING WITH HARDWARE (FRAME 6FA) |
5.0 |
| 193 |
GT.SD.012 |
PIN SPRING DOWEL |
5.0 |
| 194 |
GT.SD.015 |
EXHAUST PLENUM |
33.9 |
| 195 |
GT.SD.016 |
TORQUE CONVERTER |
63.7 |
| 196 |
GT.SD.017 |
SERVO VALVES |
20 |
| 197 |
GT.SD.023 |
DIESEL ENGINE (* WHEN NEEDED TO IMPORT) |
5.0 |
| 198 |
GT.SD.024 |
STARTING MOTOR |
76.9 |
| 199 |
GT.SD.025 |
STARTING AA COMPRESSOR (BLOWER) |
6.9 |
| 200 |
GT.SD.027 |
THRUST WASHER & DU BUSHES |
5.0 |
| 201 |
GT.SD.030 |
FUEL OIL PUMP FOR (FRAME - 3 & 5) |
5.0 |
| 202 |
GT.SD.031 |
ELECTRIC CLUTCH |
5.0 |
| 203 |
GT.SD.033 |
AIR FILTER REGULATOR / PRESSURE FILTER REGULATORS |
5.0 |
| 204 |
GT.SD.034 |
FIBRE GLASS CLOTH |
5.0 |
| 205 |
GT.SD.036 |
TOOL KIT |
5.0 |
| 206 |
GT.SD.037 |
LIQUID FLOW DIVIDER |
16.7 |
| 207 |
GT.SD.038 |
DLN KIT / MNQC KIT / SPECIAL COMBUSTION SYSTEM ETC |
1198.3 |
| 208 |
GT.SD.039 |
RATCHET GEAR |
1 |
| 209 |
GT.SD.040 |
GRAFOIL PACKING RINGS |
5.0 |
| 210 |
GT.SD.041 |
GEAR AND RACKS |
5.0 |
| 211 |
GT.SD.045 |
EXHAUST FRAME BLOWERS/ EXHAUST FRAME COOLING MODULE FOR FRAME 6FA & 9E * |
5.0 |
| 212 |
GT.SD.048 |
PLEXI GLASS RINGS |
5.0 |
| 213 |
GT.SD.049 |
MOTOR, DIESEL START |
10.0 |
| 214 |
GT.SD.050 |
BORESCOPE KIT |
5.0 |
| 215 |
GT.SD.052 |
CAP & LINERS |
5.0 |
| 216 |
GT.SD.056 |
HOLD DOWN RING ASSEMBLY |
5.0 |
| 217 |
GT.SD.057 |
PHASE - III SUB-COMPONENTS (NOZZLES, BUCKETS, TURBINE WHEELS, SPACERS, COMP. WHEELS ETC.) |
374.3 |
| 218 |
GT.SD.058 |
PHASE - III KIT (NOZZLES, ROTOR, STATOR BLADES ETC.) |
5188.0 |
| 219 |
GT.SD.059 |
LIFTING BEAM |
6.4 |
| 220 |
GT.SD.063 |
GASKETS SPECIAL FOR DLN COMBUSTORS |
85.8 |
| 221 |
GT.SD.067 |
AL. SEALS |
5.0 |
| 222 |
GT.SD.068 |
AA COMPRESSOR |
19.3 |
| 223 |
GT.SD.070 |
STARTING SYSTEM ( * ONLY FOR FR. 9 ) ( ** ONLY FOR FR.6 FA ) |
57.1 |
| 224 |
GT.SD.072 |
FUEL OIL PUMP FR 6 |
5.0 |
| 225 |
GT.SD.075 |
HONEY COMB SHEET |
5.4 |
| 226 |
GT.SD.077 |
SHROUD ASSY/SEGMENTS |
5.0 |
| 227 |
GT.SD.078 |
FLANGE TO FLANGE TURBINE (BASED ON PROPRIETARY CERTIFICATE) |
115.8 |
| 228 |
GT.SD.079 |
DIRECT READING MICROMETER |
5.0 |
| 229 |
GT.SD.081 |
3 WAY FUEL TRANSFER VALVE (MOTORISED) |
5.0 |
| 230 |
GT.SD.083 |
3-WAY TRANSFLOW VALVES |
5.0 |
| 231 |
GT.SD.084 |
FILTER FLUID CONTROL AIR CERAMIC |
1 |
| 232 |
GT.SD.085 |
COOLING HOLE DRILLING FOR NOZZLE / BUCKETS |
5.0 |
| 233 |
GT.SD.095 |
FUEL NOZZELS |
5.0 |
| 234 |
GT.SD.096 |
STARTING SYSTEM FOR 6FA |
5.0 |
| 235 |
GT.SD.097 |
NAPTHA, LUBE OIL FILTER(IMPORTED) |
5.0 |
| 236 |
GT.SD.100 |
DIESEL ENGINE (INDEGENOUS) |
51.7 |
| 237 |
GT.SD.101 |
LUBE OIL MIST ELIMINATOR(INDIGENOUS) |
5.0 |
| 238 |
GT.SD.106 |
ROTOR HARD WARE |
60 |
| 239 |
GT.SD.108 |
TBG ITEMS |
5.0 |
| 240 |
GT.SD.112 |
DIESEL ENGINE SPARES |
5.0 |
| 241 |
GT.SD.113 |
INDUSTRIAL VIDEOSCOPE |
5.0 |
| 242 |
GT.SD.114 |
MOTOR STATOR COIL & CORE RE-STAGGERING |
5.0 |
| 243 |
GT.SD.115 |
FLEXIBLE COUPLING |
5.0 |
| 244 |
GT.SD.117 |
SOLENOID VALVE |
5.0 |
| 245 |
GT.SD.120 |
PHASE-III KIT FOR GAS TURBINE |
5.0 |
| 246 |
H.CO.001 |
CLEVIS |
5.0 |
| 247 |
H.CO.002 |
CLUTCH CARRIER |
5.0 |
| 248 |
H.CO.004 |
GOOSE NECK. |
5.0 |
| 249 |
H.CO.008 |
SPLIT MASTER BUSHING. |
5.0 |
| 250 |
H.CO.015 |
GEAR BOX CASTINGS |
15.2 |
| 251 |
H.FO.004 |
F/M SWIVEL BAIL. |
37.5 |
| 252 |
H.SD.003 |
AIR DRYER. |
5.0 |
| 253 |
H.SD.008 |
BRAKE LINING BLOCKS AND PLUG. |
6.2 |
| 254 |
H.SD.009 |
BRAKE RIMS(BRAKE FLANGES). |
40.3 |
| 255 |
H.SD.010 |
BRASS FITTINGS. |
5.0 |
| 256 |
H.SD.013 |
BULL DOG GRIPS,THIMBLES, D-SHACKLES. |
7.0 |
| 257 |
H.SD.014 |
CAT HEADS,SPINNING AND BREAKOUT. |
120.1 |
| 258 |
H.SD.019 |
CENTRIFUGAL WATER PUMPS WITH MOTORS. |
18.8 |
| 259 |
H.SD.026 |
COPPER TUBES. |
5.0 |
| 260 |
H.SD.030 |
AIR CIRCUIT BREAKERS |
5.0 |
| 261 |
H.SD.036 |
EMERGENCY LIGHT. |
5.0 |
| 262 |
H.SD.037 |
ESCAPE LINE(GERONIMO). |
14.3 |
| 263 |
H.SD.044 |
GREASE RETAINERS. |
5.0 |
| 264 |
H.SD.049 |
HOOK (SPL.TYPE). |
5.0 |
| 265 |
H.SD.057 |
KELLY SPINNER. |
5.0 |
| 266 |
H.SD.058 |
LADDERS. (EXTENSION) |
5.0 |
| 267 |
H.SD.078 |
QC COUPLERS, SOCKETS, NIPPLES (SPL.TYPE SD ITEMS). |
5.0 |
| 268 |
H.SD.079 |
HEAVY DUTY HOSE CLAMP FOR OIL FIELD APPLICATION |
5.0 |
| 269 |
H.SD.082 |
SAF-T-CLIMB. |
5.0 |
| 270 |
H.SD.083 |
SELF ALIGNING PILLOW BLOCK. |
5.0 |
| 271 |
H.SD.085 |
SHIMS. IS:513 GR "O" IS:513GRDD |
5.0 |
| 272 |
H.SD.086 |
SHEAVES. |
49.8 |
| 273 |
H.SD.087 |
SOLID PIN DRIVE MASTER BUSHING |
5.0 |
| 274 |
H.SD.090 |
SLING LINES(WITH END SOCKETS). 3-96532-1-61 |
113.6 |
| 275 |
H.SD.091 |
SNATCH BLOCKS |
5.0 |
| 276 |
H.SD.103 |
TWIN STOP SAFETY SYSTEM (DUO STOP). |
61.7 |
| 277 |
H.SD.108 |
VICTAULIC COUPLINGS. 3657008 |
5.0 |
| 278 |
H.SD.113 |
WIRE ROPES(API APPROVAL) 1"DIA AND ABOVE SIZE ROPES. |
5.0 |
| 279 |
H.SD.114 |
WIRE ROPES (API APPROVED LESS THAN 1" DIA). |
5.0 |
| 280 |
H.SD.117 |
SPREY NOZZEL |
5.0 |
| 281 |
H.SD.121 |
EXPANSION JOINTS |
5.0 |
| 282 |
H.SD.125 |
MICRO SWITCH |
5.0 |
| 283 |
H.SD.128 |
SLIDE BRG PLATE |
5.0 |
| 284 |
H.SD.130 |
PERFORATED SHEETS |
8.2 |
| 285 |
H.SD.132 |
VIBRATION PROBES |
8.2 |
| 286 |
H.SD.136 |
THIN WALLED GEAR BOX BRGS. |
76.4 |
| 287 |
H.SD.138 |
BEARING PUMP |
18.3 |
| 288 |
H.SD.146 |
THRUST BALL BEARING FOR ROTARY |
5.0 |
| 289 |
H.SD.149 |
BOWEX COUPLING 4-974-10-50100 |
5.0 |
| 290 |
H.SD.153 |
PRESSURE COUPLING |
14.3 |
| 291 |
H.SD.156 |
ORIFICE PLATE |
5.0 |
| 292 |
H.SD.157 |
PRESSURE AND TEMPERATURE VALVE CONTROL |
5.0 |
| 293 |
H.SD.161 |
MANIFOLD VALVE |
5.0 |
| 294 |
H.SD.162 |
PACKING |
5.0 |
| 295 |
H.SD.163 |
FLOAT OPERATED 3-WAY VALVE |
5.0 |
| 296 |
H.SD.169 |
PNEUMATIC WRENCHES |
5.0 |
| 297 |
H.SD.170 |
BOP LIFTING SYSTEM |
5.0 |
| 298 |
H.SD.174 |
AC-VFD DRIVES |
5.0 |
| 299 |
H.SD.175 |
PIPE SPINNER |
5.0 |
| 300 |
H.SD.176 |
HYDRAULIC ELEVATOR |
5.0 |
| 301 |
H.SD.177 |
POWER SLIP |
23.2 |
| 302 |
H.SD.181 |
CELLAR PUMP |
5.0 |
| 303 |
H.SD.184 |
SURGE SUPPRESSION |
5.0 |
| 304 |
H.SD.191 |
G.I. EARTHING MATERIAL |
5.0 |
| 305 |
H.SD.201 |
FLEXIBLE ELECTRICAL CONDUIT |
5.0 |
| 306 |
H.SD.202 |
CABLE THERMOCOUPLE (2 CONDUCTOR - PTFE) |
5.0 |
| 307 |
H.SD.208 |
DEAD LINE ANCHOR |
240 |
| 308 |
H.SD.211 |
GEARBOX ASSEMBLY, GEARBOX INTERNALS OF GEARBOXES FOR FR5, FR6 AND FR9 GAS TURBINE APPLICATION |
64.3 |
| 309 |
H.SD.217 |
HIGH PRESSURE RIG WASH UNIT |
5.0 |
| 310 |
H.SD.218 |
WELDING GENERATOR SET |
5.0 |
| 311 |
H.SD.220 |
EYE WASH UNIT |
5.0 |
| 312 |
H.SD.224 |
BEARINGS FOR LOAD GEARBOXES |
5.0 |
| 313 |
H.SD.229 |
CROWN GREASING SYSTEM |
5.0 |
| 314 |
H.SD.232 |
MUD SPREADER BAFFLE |
5.0 |
| 315 |
H.SD.234 |
OVERHAULING OF B.O.P. CONTROL UNIT |
720 |
| 316 |
H.SD.239 |
ELEVATOR LINK |
5.0 |
| 317 |
H.SD.242 |
ELECTROFORGED BAR GRATING |
43.2 |
| 318 |
H.SD.243 |
BEVEL GEAR FOR PTO |
5.0 |
| 319 |
H.SD.244 |
BELT DRIVE MUD PUMP |
5.0 |
| 320 |
H.SD.245 |
AIR BOOSTER |
5.0 |
| 321 |
H.SD.248 |
2000 HP AC DRAW WORKS FOR AC RIG |
5.0 |
| 322 |
H.SD.250 |
AIR CYLINDER |
5.0 |
| 323 |
H.SD.251 |
FABRICATED WIDE FLANGE BEAMS FOR MAST & SS |
50.9 |
| 324 |
H.SD.252 |
DESANDER PARTS |
5.0 |
| 325 |
WE.04.030 |
E7018-1 SFA 5.1 BASIC COATED ELECTRODE FOR LOW TEMPERATURE SERVICE DOWN TO MINUS 40 DEG.FOR CARBON S |
5.0 |
| 326 |
WE.05.030 |
E11018 M SFA 5.5 BASIC COATED ELECTRODE FOR WELDING HIGH TENSILE AND OT STEELS UPTO 80 KG/MM SOR |
5.0 |
| 327 |
WE.06.012 |
E7018-A1 SFA 5.5 BASIC COATED ELECTRODE FOR WELDING 1/2 MO STEELS OF RADIOGRAPHIC FOR SERVICE TEMP. |
5.0 |
| 328 |
WE.06.021 |
E8013-B2 SFA 5.5 RUTILE COATED ELECTRODES FOR ROOT LAYER ON 1 CR HALF MO PR. PIPING OF RADIOGRAPHIC |
5.0 |
| 329 |
WE.06.031 |
E9013-B3 SFA 5.5 RUTILE COATED ELECTRODE FOR WELDING 2.25CR - 1MO PR.PPING OF RADIOGRAPHIC QUALITY F |
5.0 |
| 330 |
WE.06.032 |
E9018 B3 SFA 5.5 BASIC COATED ELECTRODE FOR WELDING 2.25CR 1MO CREEP RESISTING STEELS OF RADIOGRAPH |
5.0 |
| 331 |
WE.06.034 |
E9018 B9 FOR WELDING P.N0 9 MATERIALS |
5.0 |
| 332 |
WE.06.040 |
E502-16 SFA 5.4 BASIC COATED ELECTRODES FOR WELDING OF 5CR 1/2MO STEELS USED IN PETROLEUM INDUSTRIES |
5.0 |
| 333 |
WE.07.061 |
E680 A LOW HEAT INPUT ELECTRODE FOR WELDING & REPAIRING HIGHEST TENSILE STEELS, SPRING STEELS,TOOLS |
5.0 |
| 334 |
WE.07.075 |
E318-16 ELECTRODES |
5.0 |
| 335 |
WE.07.102 |
E410-15 SFA 5.4 BASIC COATED ELECTRODE FOR WELDING 13CR MARTENSITIC STAINLESS STEELS. |
5.0 |
| 336 |
WE.07.120 |
FV520-1 RUTILE ELECTRODES TO GIVE MARTENSITIC PRECIPITATION HARDENING CR NI STAINLESS STEEL WELD MET |
5.0 |
| 337 |
WE.08.021 |
E NI CI SFA 5.15 NICKEL ELECTRODE DEPOSITS PURE NICKEL WELD METAL ALLOY ON CAST IRON MACHINABLE. |
10.0 |
| 338 |
WE.08.050 |
E NIFECI SFA 5.15 LOW HEAT INPUT NICKEL IRON FOR WELDING HIGH PHOSPHOUROUS CAST IRON & FOR HIGH STRE |
5.0 |
| 339 |
WE.09.070 |
AIR HARDENING MARTENSITIC STAINLESS STEEL WITH 2% W DEPOSIT. HARDNESS 350 BHN. SPL.APPLICATION VALVE |
5.0 |
| 340 |
WE.09.092 |
STELLITE GR.21 ELECTRODES FOR HARD FACING OF STEAM TURBINE VALVES TO ACHIEVE AN HARDNESS OF 33 HRC A |
5.0 |
| 341 |
WE.11.041 |
ER 309L SFA 5.9 FOR WELDING STAINLESS STEEL OF 20/12 & BUTTERING ON CARBON STEEL IN STANDRD 12 INCHS |
5.0 |
| 342 |
WE.11.051 |
ER 308L SFA 5.9 FOR WELDING 18/8 STAINLESS STEEL AND FINAL OVERLAYING ON CARBON STEELS (WIRE FORM). |
5.0 |
| 343 |
WE.11.060 |
ER 309L SFA 5.9 SS STRIP ELECTRODE OF TYPE 24 CR 13 NI FOR BUFFER LAYER AND MULTI LAYER AND OVERLAYI |
24.9 |
| 344 |
WE.11.070 |
ER 308L SFA 5.9 S.S.STRIP ELECTRODE FOT TYPE 20 CR/10 NI FOR SECOND AND SUBSEQUENT LAYERS ON BUTTERI |
15.2 |
| 345 |
WE.11.093 |
EB6 SFA 5.23 SAW WIRE FOR WELDING OF 5 CR 1/2MO MATERIALS LIKE SA387 GR.5 CL2. |
5.0 |
| 346 |
WE.11.100 |
TAPADIA GR.- 80 USED FOR SUBMERGED ARC WELDING OF CARBON STEELS UPTO TENSILE STRENGTH 60 KG/MM SQ. W |
10.4 |
| 347 |
WE.11.110 |
BASIC FLUX OK10.71 USED FOR NARROW GAP SAW OF CARBON STEELS UPTO TENSILE STRENGTH 60 KG/MM SO. WITH |
5.0 |
| 348 |
WE.11.120 |
SAW FLUX FOR SUBMERGED ARC WELDING AND OVERLAYING OF S.S.WITH SUITABLE WIRE COMBINATION. RECORD IN / |
5.0 |
| 349 |
WE.11.130 |
FOR SUBMERGED ARC WELDING AND OVERLAYING OF S.S. WITH SUITABLE STRIP ELECTRODE. RECORD INT 101 / SAN |
5.0 |
| 350 |
WE.13.014 |
TGS IN FILLER ROD FOR TIG WELDING STEELS OF LOW TEMP.SERVICE UPTO MINUS 50 DEG.C. IN CUT LENGTHS. |
5.0 |
| 351 |
WE.13.022 |
ER70 SAI SG SFA 5.28 FILLER ROD FOR TIG WELDING OF 1/2 MOLY STEELS AND CARBON STEEL IN CUT LENGTHS. |
5.0 |
| 352 |
WE.13.052 |
AUTOMATIC TIG WELDING WIRE FOR IMPELLER IN STANDARD 12" SPOOL FOR WELDING 2-1/2 CR 1 MO AND CR MO V |
5.0 |
| 353 |
WE.13.101 |
ER CU NI SFA 5.7 FOR WELDING OF CUPRO NICKEL ALLOY |
5.0 |
| 354 |
WE.13.103 |
USW 694 FOR HARD FACING OF G.T.BUCKETS CO BASED C=0.85%, CR=28%,W=19.5%, NI=5% IV=0.05% (DIA 1.143 M |
5.0 |
| 355 |
WE.13.104 |
AMS 5796 WELDING OF SEAL ENDS OF GAS TURBINE COMPONENTS HS-25 MATERIAL |
5.0 |
| 356 |
WE.13.105 |
AMS 5801 (HS 188) |
5.0 |
| 357 |
WE.13.106 |
TIG WELDING WIRE NIMONIC 263 IN CUT LENGTHS |
20.6 |
| 358 |
WE.13.140 |
TIG WELDING WIRE FOR AUTOMATIC WELDING OF IMPELLERS OF FV 520-B MATL IN STD 12" FV 520-B SPOOL FORM. |
5.0 |
| 359 |
WE.13.150 |
FOR TIG WELDING OF ALUMINIUM CASTINGS. |
5.0 |
| 360 |
WE.13.170 |
FONA 203A FOR TIG WELDING OF COPPER ALLOYS (EG) COPPER.SN BRONZE SUITABLE FOR JOINING OF BRASS TO BR |
5.0 |
| 361 |
WE.14.014 |
E-71-T1 SFA 5.20 ALL POSITION RUTILE BASE FLUX CORED CO2 WELDING WIRE FOR WELDING CARBON STEEL TO CA |
5.0 |
| 362 |
WE.14.015 |
E-70-T5 SFA 5.20 LIGHT BASIC COATED FLUX CORED CO2 WELDING WIRE FOR WELDING CARBON STEEL TO CARBON S |
5.0 |
| 363 |
WE.15.011 |
XHD 2100 ARC WELDING ELECTRODE FOR WELDING REPAIRING ALUMINIUM CASTINGS. |
5.0 |
| 364 |
WE.15.033 |
FOR ARC WELDING AND SURFACING OF COPPER AND BRONZE. ALSO SUITABLE FOR JOINING COPPER AND BRONZE TO C |
5.0 |
| 365 |
WE.15.034 |
E215 ALUMINIUM BRONZE ELECTRODE FOR AL.BRONZE CASTINGS REPAIR. |
5.0 |
| 366 |
WE.15.051 |
E CU MN NI AL SFA 5.6 FOR OVERLAYING OF AL.BRONZE ON CARBON STEEL MALT, AND FOR JOINING |
5.0 |
| 367 |
WE.15.052 |
E CU AL A2 SFA 5.6 FOR ALUMINIUM BRONZE OVERLAY ON CARBON STEEL MATERIAL FOR JOINING OF NAVAL BRASS |
5.0 |
| 368 |
WE.15.062 |
E NI CR FE-3 SFA 5.11 OVERLAYING OF INCONEL 600 ON CARBON STEEL & FOR JOINING P5 TO P8 MATERIAL |
18.4 |
| 369 |
WE.15.071 |
E CU NI SFA 5.6 FOR WELDING AND OVERLAYING ON FOR WELDING AND OVERLAYING ON CUPRO NICKEL ALLOYS |
5.0 |
| 370 |
WE.16.022 |
AF 306 FOR JOINING COPPER COILS (FLUX COATED SILVER BRAZING RODS) |
5.0 |
| 371 |
WE.16.061 |
RUPOTOM - A FLUX TO BE USED WITH SILVER BRAZING ALLOY |
5.0 |
| 372 |
WE.16.110 |
EUTECTRODE 157 SOLDERING WIRE FOR JOINING DISSIMILAR MATERIALS |
5.0 |
| 373 |
WE.16.160 |
FOR VACCUM BRAZING OF FUEL NOZZLES OF GAS TURBINES *STOP OFF FOR MASKING (LINEAR APPLICATION) |
5.0 |
| 374 |
WE.31.001 |
TEMPERATURE INDICATING CARYONS |
5.0 |
| 375 |
WE.31.002 |
FLINTS FOR SPARK LIGHTERS |
5.0 |
| 376 |
WE.31.003 |
SPATTER CURE |
5.0 |
| 377 |
WE.31.010 |
TUNGSTEN RODS 2% THORIATED |
5.0 |
| 378 |
WE.31.040 |
CUTTOGENS AND ITS NOZZELS, OXYGEN REGULATORS ACETYLENE REGULATORS ARGON REGULATOR AND SPARES FOR ABO |
5.0 |
| 379 |
WE.31.041 |
GMAW WELDING TORCHES &SPARES |
5.0 |
| 380 |
WE.31.050 |
LIGHT WEIGHT TIG WELDING TORCHES |
5.0 |
| 381 |
WE.31.060 |
WATER COOLED TIG WELDING TORCHES |
5.0 |
| 382 |
WE.31.061 |
W/C TIG TORCH TTM35W FOR KEMPPI MASTER TIG MACHINE |
5.0 |
| 383 |
WE.31.062 |
EWM MAKE TIG WELDING TORCH AND SUITABLE TORCH SPARES |
5.0 |
| 384 |
WE.31.080 |
GREISHAM MACHINE CUTTING TORCH |
5.0 |
| 385 |
WE.31.090 |
SUAG PLASMA CUTTING MACHINE TORCH CONSUMABLES |
5.0 |
| 386 |
WE.31.100 |
REGULATORS, CUTTING TORCHES, CUTTING NOZZLES AND SUITABLE SPARES USED WITH BMCG |
5.0 |
| 387 |
WE.31.101 |
CUTTING TORCH & NOZZLES USED IN CNC FMALM CUTTING MACHINE WITH BMCG |
5.0 |
| 388 |
Z.FM.002 |
FERRO - BORON (14-19%) |
5.0 |
| 389 |
Z.FM.003 |
H.C. FERRO MANGANESE (70-74%) |
7.5 |
| 390 |
Z.FM.005 |
FERRO SILICON -LUMPS (70-75%) |
5.0 |
| 391 |
Z.FM.006 |
FERRO SILICON 6-10% MG ALLOY |
5.0 |
| 392 |
Z.FM.007 |
SPECIFIC GRADE OF PIG IRON |
5.0 |
| 393 |
Z.FM.010 |
FORGINGS FOR NI-HARD ROLL DIES |
5.0 |
| 394 |
Z.FM.013 |
FERRO TITANIUM 40% |
5.0 |
| 395 |
Z.NF.002 |
AL-SILICON ALLOY LM6 AL-SILICON ALLOY LM9 |
75.6 |
| 396 |
Z.NF.004 |
AL-TITANIUM INGOTS |
5.0 |
| 397 |
Z.NF.006 |
COPPER-14% PHOSPHOROUS MASTER ALLOY |
5.0 |
| 398 |
Z.NF.007 |
COPPER 10% & 15% SILICON MASTER ALLOY |
5.0 |
| 399 |
Z.NF.008 |
PURE ALUMINIUM INGOTS |
5.0 |
| 400 |
Z.NF.009 |
PURE MAGNESIUM INGOTS |
5.0 |
| 401 |
Z.NF.010 |
PURE COPPER |
5.0 |
| 402 |
Z.NF.011 |
PURE LEAD |
5.0 |
| 403 |
Z.NF.013 |
PURE ZINC |
5.0 |
| 404 |
Z.NF.014 |
PURE ANTIMONY |
5.0 |
| 405 |
Z.NF.015 |
COPPER - 10% ARSENICAL MASTERALLOY |
5.0 |
| 406 |
Z.RF.002 |
CHANNEL FURNACELININGMATERIALS, BRICKS, MORTARS ETC. |
5.0 |
| 407 |
Z.RF.003 |
COILGROUTING REFRACTORY CASTABLE FOR 5T INDUCTONFURNACE |
5.0 |
| 408 |
Z.RF.004 |
FIRE CLAY POWDER |
5.0 |
| 409 |
Z.RF.005 |
REFRACTORY SLEEVES & BENDS FOR GATING SYSTEMS |
5.0 |
| 410 |
Z.RF.006 |
SILICA RAMMING MASS FOR INDUCTION FURNACES |
5.0 |
| 411 |
Z.RF.009 |
HIGH ALUMINA CASTABLE FOR INDUCTION FURNACE LINING (NF) |
5.0 |
| 412 |
Z.SD.001 |
BORIC ACID (BORAX MORARJI MAKE |
5.0 |
| 413 |
Z.SD.002 |
CALCIUM FLUORIDE (ACID GRADE FLOURSPAR POW-DER >=96% CAFE CONTENT) |
5.0 |
| 414 |
Z.SD.005 |
COVERING, CLEANING & DEGASSIN FLUX FOR RED BRASS & TIN BRONZE. |
5.0 |
| 415 |
Z.SD.007 |
COVERING FLUX FOR PROTECTION &CLEANING COPPER BASE ALLOY. |
5.0 |
| 416 |
Z.SD.008 |
CLAY GRAPHITE CRUCIBLE FOR MELTING COPPER ALLOY IN INDUCTION FURNACE. |
5.0 |
| 417 |
Z.SD.011 |
EXOTHERMIC & INSULATING COMPOUND FOR NON-FERROUS CASTING (CU) |
5.0 |
| 418 |
Z.SD.012 |
GLUE FOR SAND CORES (1KG SQUEEZE BOTTLE PACKED) |
5.0 |
| 419 |
Z.SD.013 |
NATURAL GRAPHITE POWDER |
5.0 |
| 420 |
Z.SD.014 |
HIGH TEMP MODIFYING FLUX FOR AL.ALLOY |
5.0 |
| 421 |
Z.SD.016 |
INOCULENT FOR G.I.CASTINGS OF CE 3.6 TO3.9% AT TEMP 1400-1450 C. |
5.0 |
| 422 |
Z.SD.017 |
INSULATING READY MIX DRESSING FOR GRAVITY DIES OF AL.CASTINGS |
5.0 |
| 423 |
Z.SD.018 |
IRON OXIDE POWER |
5.0 |
| 424 |
Z.SD.019 |
LOW TEMP. MODIFYING FLUX FOR AL.ALLOY |
5.0 |
| 425 |
Z.SD.020 |
MELTING FLUX FOR AL.BRASS & SI. BRASS |
5.0 |
| 426 |
Z.SD.021 |
MODIFIER FOR AL.ALLOY TO BE USED IN HOLDING FURNACE CRUCIBLE |
5.0 |
| 427 |
Z.SD.022 |
READY MIX LUBRICATING DRESSING WITH SEMI COLLOIDED GRAPHITE FOR GRAVITY DIE CASTING |
5.0 |
| 428 |
Z.SD.023 |
RESINS TO BE USED AS BINDER FOR MOULD PAINTS |
5.0 |
| 429 |
Z.SD.024 |
SLAG COAGULANT FOR FERROUS CASTINGS |
5.0 |
| 430 |
Z.SD.025 |
SPIRIT BASED ZIRCON READY MIXED PAINT FOR SAND CORES & MOULDS |
5.0 |
| 431 |
Z.SD.026 |
THINNER FOR MOULD DRESSING |
5.0 |
| 432 |
Z.SD.030 |
MOLASSES |
5.0 |
| 433 |
Z.SD.034 |
RED SAND (CLAY) |
5.0 |
| 434 |
Z.SD.035 |
SILICA SAND (MED) |
99.3 |
| 435 |
Z.SD.036 |
ASBESTOS MILL BOARD |
5.0 |
| 436 |
Z.SD.037 |
HYDO LIGNUM BOARDS |
5.0 |
| 437 |
Z.SD.038 |
TIN COATED SPRING DENSENERS |
5.0 |
| 438 |
Z.SD.039 |
TIN COATED HORSE SHOE NAILS |
5.0 |
| 439 |
Z.SD.040 |
GRAPHITE STOPPER HEAD DRG.NO. 4-04-703 DRG.NO. 4-04-706 |
5.0 |
| 440 |
Z.SD.041 |
CALCINED PETROLIUM COKE |
5.0 |
| 441 |
Z.SD.042 |
ZIRCON SAND (CANALISED ITEM) |
5.0 |
| 442 |
Z.SD.045 |
SOFT WOOD FOR PATTERNS |
23.2 |
| 443 |
Z.SD.046 |
2" NAILS FOR PNEUMATIC NAILERS |
5.0 |
| 444 |
Z.SD.048 |
FLEXIBLE PLASTIC LETTERS FOR MOULDS & CORE BOXES |
5.0 |
| 445 |
Z.SD.049 |
THERMOCOUPLE & THERMOCOUPLE TIPS / BMD THERMOCOUPLE TIPS |
5.0 |
| 446 |
Z.SD.050 |
TITANIUM PUTTY, ALUMINIUM PUTTY & ITS THINNER/CLEANER |
5.0 |
| 447 |
Z.SD.051 |
C.S.K.WOOD SCREWS |
5.0 |
| 448 |
Z.SD.052 |
AL SHOTS |
5.0 |
| 449 |
Z.SD.053 |
CHROMITE SAND |
5.0 |
| 450 |
Z.SD.054 |
CADMIUM CELLS & ITS CHARGER |
5.0 |
| 451 |
Z.SD.055 |
STRIPPING AGENT |
5.0 |
| 452 |
Z.SD.056 |
COAL DUST |
5.0 |
| 453 |
Z.SD.057 |
DEGASSING GRAIN REFINING AND CLEANING TABLET FOR AL, ALLOY |
5.0 |
| 454 |
Z.SD.058 |
DEGASSOR FOR COPPER BASE ALLOY |
5.0 |
| 455 |
Z.SD.059 |
ADHESIVE GLUE FOR WOOD |
5.0 |
| 456 |
Z.SD.060 |
M.S CHAPLETS |
5.0 |
| 457 |
Z.SD.061 |
THINNER FOR PAINT |
5.0 |
| 458 |
Z.SD.062 |
N.C.PAINTS & PUTTY |
5.0 |
| 459 |
Z.SD.063 |
ALUMINIUM ELECTRODES |
5.0 |
| 460 |
Z.SD.064 |
ETR 2L PROBE |
5.0 |
| 461 |
Z.SD.065 |
GRAPHITE SLEEVES & ROTOR, |
5.0 |
| 462 |
Z.SD.066 |
WOOD PRIMER |
5.0 |
| 463 |
Z.SD.067 |
WATER BASED READY MIX ZIRCON PAINT ( HOLCOTE-100) - SPL. PAINT FOR STEEL CASTINGS. |
5.0 |
| 464 |
Z.SD.068 |
20% IRON COPPER MASTER ALLOY |
5.0 |
| 465 |
Z.SD.069 |
NATURAL MOULDING SAND |
5.0 |
| 466 |
Z.SD.070 |
C.I. CHAPLETS, DRG. NO.3-04-375 |
5.0 |
| 467 |
Z.SD.071 |
NYLON CORE VENT PIPE |
5.0 |
| 468 |
N A |
FRAME OF MANHOLE WITH WINDOW(SHEET METAL WORK) |
10 |
| 469 |
NA |
AIR PROOF DOOR WITH INSPECTION WINDOW(SHEET METAL WORK) |
10 |
| 470 |
K.CO.026 |
GRINDING ROLLS SIZE 50" AND ABOVE, GWL MIN.7500HRS AND MATCHING BRS (OEM) |
40000 |
| 471 |
K.CO.029 |
GRINDING ROLLS SIZE 50" AND ABOVE, GWL MIN. 6000HRS. AND MATCHING BRS (OEM) |
60000 |
| 472 |
EGORY |
MATL CODE |
Matl Desc |
| 473 |
F.CO.054 |
IMPELLER ( CEP WEIR DESIGN ) EN H SERIES, EN J SERIES |
30 |
| 474 |
N'A |
ARMATURE LAMINATION (OPRN REQUIRED: SHEARING, BLANKING, TRIMMIMG, PUNCHING, NOTCHING,) |
10 |
| 475 |
NA' |
ROTOR LAMINATION (OPRN REQUIRED: SHEARING, BLANKING, TRIMMIMG, PUNCHING, NOTCHING,) |
10 |
| 476 |
GT.SD.055 |
SLINGS, CABLES, WIRE ROPS, SHACKLE ANCHOR |
2.5 |
| 477 |
D.PT.016 |
HIGH FIN TUBES STAINLESS STEEL / CARBON STEEL |
1 |
| 478 |
D.PT.017 |
HIGH FIN TUBES NON FERROUS |
1 |
| 479 |
WE.07.092 |
E347-15 SFA 5.4 BASIC COATED ELECTRODE FOR WELDING STABILISED AND 18/8 STAINLESS STEELS. |
10 |
| 480 |
GT.CO.005 |
AUSTENITIC DUCTILE IRON CASTINGS (DIAPHRAGM CASTINGS ETC) (D |
75 |
| 481 |
GT.SD.043 |
ACCUMULATORS |
1.36 |
| 482 |
WE.31.030 |
GOUGING TORCHES |
0.25 |
| 483 |
D.SD.017 |
FAN WITH MOTOR 0.3CU.M/SEC,650MMWC(HOR) |
3.3 |
| 484 |
Z.SD.033 |
HIGH SILICA SAND FOR STEEL CASTING (QUARTZ) |
60 |
| 485 |
GT.GA.064 |
GT PRESERVATION SYSTEM |
7 |
| 486 |
GT.SD.020 |
PULLEY & BELTS |
1.5 |
| 487 |
IT.SD.021 |
D.C. MOTOR |
6.5 |
| 488 |
F.SD.090 |
MECHANICAL SEAL, BOILER FEED BOOSTER PUMP ( MLC 400 X 300H) |
70 |
| 489 |
GT.SMIV.019 |
DIFFUSER(FR-9E, FR-9FA & FR-9FB) |
11.5 |
| 490 |
K.SC.040 |
HP 1103 MILL SIDE HOUSING - MACHINING |
25 |
| 491 |
C.CO.002 |
FAN CSN42330 |
|
| 492 |
C.CO.004 |
BALANCING RINGS & INTERMEDIATE RINGS (GZ CU AL, 11 NI) HW19998 AA19933 DIN 1714 |
|
| 493 |
C.CO.006 |
BEARING SHELL & BEARING |
|
| 494 |
C.CO.008 |
AIR GUIDE RING BAFFLE RING & ALUMINUM CASTING |
|
| 495 |
C.FO.003 |
SHAFT FORGINGS (FOR EXCITER & 4 POLE TGS) |
|
| 496 |
C.FO.004 |
FAN BLADE FORGINGS (SKODA TYPE) CSN424201 |
|
| 497 |
C.FO.005 |
FAN BLADE FORGINGS (KWU DESIGN) AL ZN. MG. 2F42 |
|
| 498 |
C.FO.009 |
AL.BRONZE ROTOR WEDGE FORGINGS |
|
| 499 |
C.IM.007 |
UHU ADHESIVE & LOCKTITE ADHESIVE |
|
| 500 |
C.IM.012 |
DOBECKOT-505C AA271002 |
|
| 501 |
C.IM.013 |
VARNISH SIB-642(8001) AA27555 |
|
| 502 |
C.IM.014 |
CONDUCTIVE VARNISH, SIB-643 (K8003) |
|
| 503 |
C.IM.019 |
HARDNER, H-90 |
|
| 504 |
C.IM.021 |
DILUENT-C |
|
| 505 |
C.IM.022 |
HARDNER HV-998 |
|
| 506 |
C.IM.025 |
HARDNER EH411 |
|
| 507 |
C.IM.026 |
CYCLOALIPHATIC CARBOXYLIC ANALYDRIDE HARDNER (H-1006) (HARDNER RUTADUR-HM OF M/S.BAKELITE |
|
| 508 |
C.IM.027 |
THINNER-E |
|
| 509 |
C.IM.028 |
THINNER -12 |
|
| 510 |
C.IM.029 |
THINNER -13 |
|
| 511 |
C.IM.033 |
CATALYST-4 FOR RTV 3110 |
|
| 512 |
C.IM.037 |
MICA POWDER HY27697 |
|
| 513 |
C.IM.038 |
SILICA POWDER |
|
| 514 |
C.IM.039 |
ASBESTOS POWDER |
|
| 515 |
C.IM.041 |
GRAPHITE POWDER |
5.0 |
| 516 |
C.IM.044 |
ERBE DOL |
5.0 |
| 517 |
C.IM.045 |
TERROSTAT 33 |
5.0 |
| 518 |
C.IM.047 |
RTV M480 |
5.0 |
| 519 |
C.IM.051 |
TITE SEAL |
5.0 |
| 520 |
C.IM.055 |
CALMICAFLEX TAPE PE2 HY25161 |
5.0 |
| 521 |
C.IM.056 |
SAMICAFLEX TAPE |
5.0 |
| 522 |
C.IM.057 |
COMMUTATOR MICANITE SHEETS |
5.0 |
| 523 |
C.IM.059 |
RESIN POOR MICA TAPE ROGS 272 (0.14 X 25) HY25262 |
5.0 |
| 524 |
C.IM.060 |
RESIN POOR MICA TAPE /SHEET ROGS 280.6 (0.12 X 12) & (0.12 X 1000MM) HY25261 |
5.0 |
| 525 |
C.IM.062 |
RESIN POOR MICA GLASS SHEET (0.15 THK, ZINC NAPTHANATE TREATED) KUN 5644 |
5.0 |
| 526 |
C.IM.064 |
FOM MOULDING MICANITE (B-CLASS) KUN 5631 |
5.0 |
| 527 |
C.IM.065 |
SPLIT MICA FLEECE TAPE KUN 5653 |
5.0 |
| 528 |
C.IM.067 |
NOMEX GLASS FLEECE (0 MM THICK) KUN 5627 |
5.0 |
| 529 |
C.IM.068 |
THERMOSETTING EPOXY GLASS SHEET (1MM THICK) KUN 5622/COMPONENT/ASSEMBLY/MATERIAL |
5.0 |
| 530 |
C.IM.069 |
IMPREGNATED POLYSTER FLEECE, GPV 607 |
5.0 |
| 531 |
C.IM.070 |
SYNTHETIC FIBRE TAPE BD 540.1 |
5.0 |
| 532 |
C.IM.071 |
LAVAPRENE GLASS SLEEVE SCHL 559, HY25762, 47116-0057 |
5.0 |
| 533 |
C.IM.072 |
LAVAPRENE GLASS TAPE 0.7 X 25 |
5.0 |
| 534 |
C.IM.074 |
POLYSTER GLASS TAPE & CLOTH, 0.09 X 25 MM AND 1000 MM |
5.0 |
| 535 |
C.IM.075 |
ASBESTOS TAPE |
5.0 |
| 536 |
C.IM.076 |
NOMEX SINGLE SIDE ADHESIVE TAPE, 0.09 X 19 |
5.0 |
| 537 |
C.IM.078 |
POLYSTER DOUBLE SIDE ADHESIVE TAPE, 0.06 X 25 MM |
5.0 |
| 538 |
C.IM.082 |
POLYSTER RELEASE FILM/TAPE |
5.0 |
| 539 |
C.IM.083 |
HEAT SHRINKABLE POLYSTER FILM |
5.0 |
| 540 |
C.IM.084 |
POLYSTER FLEECE TAPE, SIZE: 0.08 X 40 MM 47112-0051 |
5.0 |
| 541 |
C.IM.085 |
POLYSTER CONDUCTING LAMINATES (0.3, 0.5 THK) KUN 5641 |
5.0 |
| 542 |
C.IM.086 |
GLASS CONDUCTING LAMINATES SIZE: 0.1 TO 0.5 THKI |
5.0 |
| 543 |
C.IM.087 |
POLYSTER CONDUCTING FLEECE 0.08 X 40 MM 47116-0040 |
5.0 |
| 544 |
C.IM.089 |
POLYSTER CONDUCTING FLEECE 0.1 X 1000 IN ROLLS GPV 607, KUN 5644 |
5.0 |
| 545 |
C.IM.090 |
NEOPRENE GLASS SLEEVE 0.7 X 10 MM HY25622 |
5.0 |
| 546 |
C.IM.095 |
BAKELITE PAPER |
5.0 |
| 547 |
C.IM.098 |
POLY FLEECE WITH GRAPHITE 03 EFR 13AA "S", 0.1 X 60 POLY FLEECE WITH GRAPHITE 06ELR 14CC "S" 0.1 X 4 |
5.0 |
| 548 |
C.IM.099 |
COMBINED PRESS BOARD, VSP 3251 DIM 7739 |
5.0 |
| 549 |
C.IM.101 |
PHENOLIC PAPER BASED LAMINATE |
5.0 |
| 550 |
C.IM.105 |
PHEONOLIC PAPER BASED TUBE |
5.0 |
| 551 |
C.IM.107 |
ACRYLIC PERSPEX SHEET AA22820 |
5.0 |
| 552 |
C.IM.108 |
POLYSTER FLEECE TAPE 0.1 X 30 GPV 603 |
5.0 |
| 553 |
C.IM.113 |
RIPPLE SPRINGS GEN 7305 |
5.0 |
| 554 |
C.IM.115 |
SOFT GLASS MAT (2 POLE M/C) KUN 5611 |
5.0 |
| 555 |
C.IM.116 |
SOFT GLASS MAT (4 POLE M/C) HM 693 & GLASS MAT (0.8 MM) TREATED WITH ACCELERATOR |
5.0 |
| 556 |
C.IM.121 |
INSULATION FLEX, PIPE ASSLY |
5.0 |
| 557 |
C.IM.123 |
WOVEN POLYSTER TAPE |
5.0 |
| 558 |
C.IM.124 |
WOVEN POLYSTER SHRINK TAPE |
5.0 |
| 559 |
C.IM.125 |
SHRINKABLE POLYSTER FABRIC TAPE SIZE: 0.25 X 25 BP23795 DM25322 |
5.0 |
| 560 |
C.IM.127 |
GLASS CORD DIA 1.5 MM |
5.0 |
| 561 |
C.IM.129 |
VARNISHED GLASS ROWINGS DIA 15 AND DIA 30 MM |
5.0 |
| 562 |
C.IM.134 |
CLMO LUFT VARNISH |
5.0 |
| 563 |
C.IM.135 |
POLYSTER FOLIUM - 0.04 914MM |
5.0 |
| 564 |
C.IM.139 |
ANAEROBIC ADHESIVE (HYLOGRIP 4831) |
5.0 |
| 565 |
C.IM.140 |
UN-TREATED SYNTHETIC FIBER TAPE |
5.0 |
| 566 |
C.IM.141 |
INSULATION TROUGHS FOR DIODES AND HEAT SINKS |
5.0 |
| 567 |
C.IM.142 |
PHENOLIC CORE PLATE VARNISH (CLASS F) |
5.0 |
| 568 |
CG.EE.014 |
LUMINAIRES |
5.0 |
| 569 |
CG.EE.018 |
ELECTRICAL RELAY PANEL |
5.0 |
| 570 |
CG.FH.001 |
BOLT HEATING EQUIPMENT |
5.0 |
| 571 |
CG.HP.003 |
OIL CENTRIFUGE UNIT |
5.0 |
| 572 |
CG.HP.007 |
FRL UNIT |
5.0 |
| 573 |
CG.ID.007 |
VIDEOSCOPE / BOROSCOPE KIT |
5.0 |
| 574 |
HY.M4.007 |
DERMA SHIELD CREAM |
5.0 |
| 575 |
HY.M4.009 |
KERODEX KEROCLEANSE ETC |
5.0 |
| 576 |
HY.M4.016 |
RENOL ( HAND CONDITIONING CREAM ) |
5.0 |
| 577 |
HY.N2.008 |
SUMMER CAPS |
5.0 |
| 578 |
HY.N2.009 |
RAIN COAT |
5.0 |
| 579 |
HY.N2.011 |
BANIYANS |
5.0 |
| 580 |
HY.N2.013 |
BLUE DRILL COTTON APRON |
5.0 |
| 581 |
HY.N2.019 |
PAD-LOCKS |
5.0 |
| 582 |
HY.N2.024 |
BAR SOAP |
5.0 |
| 583 |
HY.N3.005 |
BITUMEN COATED HESSIAN POLYTHENE KRAFT PAPER |
5.0 |
| 584 |
HY.N3.012 |
SILICAGEL |
5.0 |
| 585 |
HY.N3.013 |
WIRE NAILS |
5.0 |
| 586 |
HY.N3.014 |
WAX PAPER |
5.0 |
| 587 |
HY.N3.016 |
AIR BUBBLE SHEETS |
5.0 |
| 588 |
HY.N3.018 |
CORRUGATED FIBRE BOARD BOXES |
5.0 |
| 589 |
HY.N3.020 |
PRESSURE SENSITIVE ADHESIVE TAPES (BOPP TAPES) |
5.0 |
| 590 |
HY.N3.025 |
V.C.I. PAPER |
5.0 |
| 591 |
HY.N3.026 |
GENERAL CARGO CONTAINERS |
5.0 |
| 592 |
HY.N4.007 |
LECO-ACCELERATOR |
5.0 |
| 593 |
HY.N4.008 |
MANILA ROPES |
5.0 |
| 594 |
HY.N4.016 |
HOSE CLIPS. |
5.0 |
| 595 |
HY.N4.018 |
ROBIN BLUE POWDER |
5.0 |
| 596 |
HY.N4.020 |
MICROLAP FLEXIBLE WHEELS |
7.7 |
| 597 |
HY.N4.030 |
PRESS PAN SHEET |
5.0 |
| 598 |
HY.N4.031 |
PROTECTIVE SLEEVE |
5.0 |
| 599 |
HY.N5.002 |
CARBON PAPER |
5.0 |
| 600 |
HY.N5.008 |
PLASTIC-FOLDERS,FILES,COMBS ETC. |
5.0 |
| 601 |
HY.N5.013 |
CLOTH LINED COVERS & ORDINARY COVERS / FILE COVERS / ENVELOPES |
5.0 |
| 602 |
HY.N5.016 |
FILE COVERS AND ALL PRINTED STATIONERY |
5.0 |
| 603 |
HY.N5.019 |
ENGINEERING PROJECT BOX FILES |
5.0 |
| 604 |
HY.N6.003 |
MONO ETHYLENE GLYCOL |
5.0 |
| 605 |
HY.N6.009 |
ANABOND - 340 |
5.0 |
| 606 |
HY.N6.010 |
COCONUT OIL |
5.0 |
| 607 |
HY.N6.013 |
TIDOLINE TIDOLUX |
5.0 |
| 608 |
HY.N6.014 |
REREFINING OF USED TURBINE OIL. |
5.0 |
| 609 |
HY.N6.025 |
CHLORINATED STOPPING OFF LACQUER (PROPRIETRY) |
5.0 |
| 610 |
HY.N6.040 |
ORGANIC BASE NEUTRAL HARDENING SALT (PROPRIETORY) |
5.0 |
| 611 |
HY.N6.041 |
GINBOND CLEANER (PROPRIETORY) |
5.0 |
| 612 |
HY.N6.042 |
GINBOND 808 (PROPRIETORY) |
5.0 |
| 613 |
HY.N6.043 |
ALUMINIUM ZINCATE (PROPRIETORY) |
5.0 |
| 614 |
HY.N6.047 |
TINNING COMPOUND (PROPRIETORY) |
5.0 |
| 615 |
HY.N6.049 |
BABBIT METAL (WHITE METAL) |
5.0 |
| 616 |
HY.N6.050 |
ROOM TEMPERATURE BLACKENING SALT (PROPRIETORY) |
5.0 |
| 617 |
HY.N6.055 |
KERESENE OIL |
5.0 |
| 618 |
HY.N6.058 |
PROFORMIN EXPANSION PASTE (PROPRIETORY) |
5.0 |
| 619 |
HY.N6.063 |
INDUSTRIAL X-RAY FILM - (SLOW SPEED) |
5.0 |
| 620 |
HY.N6.070 |
IRIDIUM 192 RADIOGRAPHY SOURCE (PROPRIETORY) |
5.0 |
| 621 |
HY.N6.072 |
ACITIC ACID GLACIAL AND WETTING AGENT |
5.0 |
| 622 |
HY.N6.073 |
STAINLESS STEEL HANGERS CHANNEL TYPE |
5.0 |
| 623 |
HY.N6.083 |
HYDROGEN HYDRATE, DIPHOSPHATE HEPTA, HYDRATE NA2HP04-7H20, TRISODIUM PHOSPHATE C.G. |
5.0 |
| 624 |
HY.N6.084 |
COAL |
5.0 |
| 625 |
HY.N6.085 |
HOUGHTON HOCUT 795-MP |
5.0 |
| 626 |
HY.N6.086 |
P3 OIL OF LOW VAPOUR AND VISCOSITY FOR VACUM PUMP |
6.8 |
| 627 |
HY.N9.003 |
CARBON DIOXIDE GAS |
5.0 |
| 628 |
HY.N9.004 |
LIQUID CARBON-DI-OXIDE |
5.0 |
| 629 |
HY.N9.006 |
AMMONIA GAS |
5.0 |
| 630 |
HY.P1.035 |
CONVEYOR BELTS / V BELTS |
5.0 |
| 631 |
HY.P1.039 |
WIRE ROPE SLINGS |
5.0 |
| 632 |
HY.P1.044 |
SWIVEL HOIST RINGS |
6.4 |
| 633 |
HY.P2.004 |
BATTERIES (DRY CELLS) & TORCH LIGHT |
5.0 |
| 634 |
HY.P2.018 |
LEAD ACID BATTERIES |
5.0 |
| 635 |
HY.P2.021 |
ORIAN CLEANING SOLVENT |
5.0 |
| 636 |
HY.P2.022 |
STANVAC CLEANING SOLVENT |
5.0 |
| 637 |
HY.P2.023 |
INSULATING LAMAR PAPER |
5.0 |
| 638 |
HY.P2.024 |
LTTS |
5.0 |
| 639 |
HY.P2.026 |
SOLAR LANTERN |
5.0 |
| 640 |
HY.P2.027 |
POLYSTER FILMS |
5.0 |
| 641 |
HY.P2.028 |
CARBON BRUSHES |
5.0 |
| 642 |
HY.P2.029 |
TEAK WOOD BOARDS |
5.0 |
| 643 |
HY.P2.030 |
INSULATING VARNISH |
5.0 |
| 644 |
HY.P2.034 |
PNEUMATIC/ ELECTRONIC TIMERS |
5.0 |
| 645 |
HY.P2.035 |
SOLDERING LEAD |
5.0 |
| 646 |
HY.P2.036 |
TEFLON TAPES |
5.0 |
| 647 |
HY.P2.038 |
POWER SAVER |
5.0 |
| 648 |
HY.P2.045 |
FIBERGLASS FLEXIBLE HEATING JACKETS |
5.0 |
| 649 |
HY.P2.046 |
HIGH BAY INDUCTION FITTINGS |
5.0 |
| 650 |
HY.P3.002 |
ALUMINIUM SHEETS |
5.0 |
| 651 |
HY.P3.004 |
A.C. PIPES |
5.0 |
| 652 |
HY.P3.006 |
PORCELAIN WASH BASINS TAPS BIBCOCKS CI BODY WITH BRASS SPINDLES POLISHED SHABAD STONE SINK SICCO BRA |
|
| 653 |
HY.P3.007 |
R.C.C. PIPES |
5.0 |
| 654 |
HY.P3.016 |
DECOLAM/HYLAM SHEETS |
5.0 |
| 655 |
HY.P3.021 |
WATERPROOF COMPOUNDS |
5.0 |
| 656 |
HY.P3.022 |
FIRST CLASS CERAMICS TILES & BATHROOM FLOOR TILES |
|
| 657 |
HY.P3.024 |
PVC COCKS(PRAYAG) POLYMER TAPS SHOWERS,BALL COCKS PVC GRATING SQUARE |
6.0 |
| 658 |
HY.P3.026 |
HIGH POLYMER CEMENT BASED ADHESIVE FOR FIXING CERAMIC & VITRIFIED TILES ON EXISTING CEMENT SURFACES |
5.0 |
| 659 |
HY.PA.004 |
H.R.ALUMINIUM PAINT FOR APPLICATION UPTO 600 DEG. CENTIGRADE INCLUDING THINNER. |
5.0 |
| 660 |
HY.PA.008 |
PAINTS FOR INDIGENOUS GAS TURBINES |
17.2 |
| 661 |
HY.PA.009 |
IMPORTED PAINTS. |
33.3 |
| 662 |
HY.PA.010 |
IMPORTED PAINTS FOR G.E.EXHAUST FRAME |
5.0 |
| 663 |
HY.TL.003 |
DIAMOND DRESSER WHEELS, DIAMOND WHEELS, DIAMOND TOOLS |
5.0 |
| 664 |
HY.TL.006 |
MOUNTED POINTS |
5.0 |
| 665 |
HY.TL.007 |
HSS BAND SAW BLADES HSS HACK SAW BLADES |
5.0 |
| 666 |
HY.TL.010 |
HSS BROACHES |
5.0 |
| 667 |
HY.TL.017 |
HSS MILLING CUTTERS |
5.0 |
| 668 |
HY.TL.032 |
HELLER INSERTS |
|
| 669 |
HY.TL.045 |
CLAMPING TOOLS (XX-USER BLOCK) |
5.0 |
| 670 |
HY.TL.046 |
MACHINE VICE |
5.0 |
| 671 |
HY.TL.048 |
REVOLVING CENTRES & DEAD CENTRES |
5.0 |
| 672 |
HY.TL.049 |
SURFACE PLATES & BOX ANGLE PLATES |
5.0 |
| 673 |
HY.TL.050 |
TAPPING ATTACHMENTS & ADAPTORS |
5.0 |
| 674 |
HY.TL.051 |
STEEL TAPES |
5.0 |
| 675 |
HY.TL.053 |
STEEL NUMBER & LETTER PUNCHES |
5.0 |
| 676 |
HY.TL.060 |
TUBE EXPANDERS |
12.9 |
| 677 |
HY.TL.062 |
ELECTRICAL POWER TOOLS |
12.6 |
| 678 |
HY.TL.063 |
PNEUMATIC TOOLS(GENERAL) |
23.6 |
| 679 |
HY.TL.064 |
THREAD MILLING CUTTERS & INSERTS |
5.0 |
| 680 |
HY.TL.068 |
DIAMOND BURNISHING TOOLS (OEM - SPARES) |
5.0 |
| 681 |
HY.TL.069 |
GRINDING WHEELS (OEM SPARES) |
6.5 |
| 682 |
HY.TL.070 |
GRINDING WHEELS DC WHEELS & SPARES(OEM - SPARES) |
11.0 |
| 683 |
HY.TL.071 |
GRINDING SEGMENTS (OEM SPARES) |
5.0 |
| 684 |
HY.TL.072 |
CREEP GRINDING WHEELS (OEM - SPARES) |
5.0 |
| 685 |
HY.TL.073 |
HSS AUTO BACK SPOT FACE CUTTERS |
5.0 |
| 686 |
HY.TL.074 |
INDEX. MILLING CUTTERS & INSERTS (OEM - SPARES) |
5.0 |
| 687 |
HY.TL.075 |
INDEXIBLE MILLING CUTTERS & INSERTS(OEM - SPARES) |
5.0 |
| 688 |
HY.TL.080 |
GROOVING TOOL HOLDERS AND CARBIDE INSERTS (OEM SPARES) |
34.6 |
| 689 |
HY.TL.084 |
HSS SPIRAL TAPS |
5.0 |
| 690 |
HY.TL.085 |
GROOVING TOOL HOLDERS (OEM-SPARES) |
5.0 |
| 691 |
HY.TL.087 |
CALIBRATION OF API THREAD GAUGES |
5.0 |
| 692 |
HY.TL.088 |
INDEXABLE DRILLS (OEM SPARES) |
|
| 693 |
HY.TL.091 |
BR TYPE TUBE EXPANDERS |
5.0 |
| 694 |
MS.AC.003 |
WATER COLLER |
5.0 |
| 695 |
MS.AC.004 |
PACKAGE A.C. |
5.0 |
| 696 |
MS.AC.007 |
TRAIN COMPRESSOR SPARES 91 GUAGING CENTER |
5.0 |
| 697 |
MS.CR.002 |
FABRICATED HORIZONTAL TYPE HELICAL GEAR BOX, HOIST GEAR BOX FOR 10T, 15T. MICROSPEED ARRANGEMENT WIT |
5.0 |
| 698 |
MS.CR.004 |
3,5,8, 10 & 15 TON CAPACITY HOOK BLOCK |
5.0 |
| 699 |
MS.CR.005 |
3.2 TON CAPACITY TROLLEY BOTTOM BLOCK |
5.0 |
| 700 |
MS.CR.006 |
315 AMPS COPPER CONDUCTOR SYSTEM |
5.0 |
| 701 |
MS.CR.013 |
INDUSTRIAL GONG BELL |
5.0 |
| 702 |
MS.CR.023 |
RADIO REMOTE CONTROL SYSTEMS FOR E O T CRANES |
7.9 |
| 703 |
MS.CR.027 |
AH CROSS HEAD 3-RS-3341 |
5.0 |
| 704 |
MS.CR.030 |
BRAKE DRUM 3-RS-7457 |
5.0 |
| 705 |
MS.CR.031 |
BUSH S-927 |
5.0 |
| 706 |
MS.CR.032 |
C.T WHEEL B.W CRANE |
5.0 |
| 707 |
MS.CR.036 |
L.T WHEEL (DRIVE) GANTRY CRANE |
5.0 |
| 708 |
MS.CR.038 |
L.T WHEEL DRIVE 10 TON |
5.0 |
| 709 |
MS.CR.041 |
LT MACHINERY 3RS-8143 |
5.0 |
| 710 |
MS.CR.043 |
MUFF COUPLING 3RS-6996 |
5.0 |
| 711 |
MS.CR.045 |
PLUMMER BLOCK 30T, 5-210, 5-511 |
5.0 |
| 712 |
MS.CR.046 |
PULLEY 3RS-1904 |
5.0 |
| 713 |
MS.CR.047 |
RUBBER BUSH LIFOSTROG CRANE S-399/1 |
5.0 |
| 714 |
MS.EE.003 |
ENERGY SAVER |
5.0 |
| 715 |
MS.EE.007 |
MEASURING PROBE |
5.0 |
| 716 |
MS.EE.010 |
SPARES FOR BATTERY OPERATED TROLLEY |
5.0 |
| 717 |
MS.EL.001 |
SINUMERIK CNC SYSTEMS, PLC"S SPARES, DIGITAL DRIVES SPARES,AC/DC MOTORS, WIRED CONTROL PANELS, RELAY |
5.0 |
| 718 |
MS.EL.055 |
ALL TYPES OF FUSES, FUSE HOLDERS, FUSE LINKS OF ALL MAKES |
5.0 |
| 719 |
MS.EL.059 |
PLASMA TORCH MAIN BODY FOR CNC FLAME CUTTING MACHINE |
5.0 |
| 720 |
MS.EL.183 |
TACHOGENERATOR,TACHO BRUSHES, TACHOMETER, TACHO FLEXIGIBLE SHAFT COUPLINGS |
5.0 |
| 721 |
MS.EL.198 |
HEATERS & HEATING ELEMENTS |
5.0 |
| 722 |
MS.EL.204 |
SUPPLY, DESIGN, INSTALLATION & MAINTENANCE OF TELEPHONY SYSTEM AND RELATED TECHNOLOGIES & APPLICATIO |
5.0 |
| 723 |
MS.FY.016 |
FIBRE GLASS, HIGH DENSITY FIBRE GLASS, FRP FG7 SUPPORT |
5.0 |
| 724 |
MS.FY.024 |
SPARES FOR ANNEALING F/C |
5.0 |
| 725 |
MS.FY.029 |
RESISTORS |
5.0 |
| 726 |
MS.FY.043 |
BRASS COUPLING FOR WATER COOLED CABLE |
5.0 |
| 727 |
MS.FY.044 |
ELECTROLYTIC CAPACITORS & SWITCHES |
5.0 |
| 728 |
MS.GS.010 |
DM PLANT VALVES AND DIAPHRAMS |
5.0 |
| 729 |
MS.GS.015 |
OIL FIRING EQUIPMENT |
5.0 |
| 730 |
MS.GS.023 |
WATER TREAT CHEMICAL |
5.0 |
| 731 |
MS.GS.028 |
SPRINGS |
5.0 |
| 732 |
MS.GS.046 |
FIRE FIGHTING EQUIP. |
5.0 |
| 733 |
MS.GS.052 |
ANALYSERS |
5.0 |
| 734 |
MS.GS.067 |
FUEL HANDLING PUMPS |
5.0 |
| 735 |
MS.GS.068 |
THERMODYNAMIC STEAM TRAPS |
5.0 |
| 736 |
MS.GS.069 |
INDUSTRIAL EXHAUST FANS |
5.0 |
| 737 |
MS.ME.002 |
TELESCOPIC COVER |
5.0 |
| 738 |
MS.ME.004 |
STARTER |
5.0 |
| 739 |
MS.ME.007 |
COOLANT PUMP |
5.2 |
| 740 |
MS.ME.009 |
MODULAR VALVE |
5.0 |
| 741 |
MS.ME.012 |
SPARES FOR STRESS RELIEVING FURNACE |
5.0 |
| 742 |
MS.ME.020 |
ELECTRICAL & AIR CONDITIONING ITEMS |
5.0 |
| 743 |
MS.ME.021 |
MECHANIZED OPERATED PLATFROM |
5.0 |
| 744 |
MS.ME.022 |
LIQUID RING VACUUM PUMPS |
5.0 |
| 745 |
MS.ME.202 |
CENTER LATHE DRILLING MACHINE MILLING MACHINE BORING MACHINE GRAINDING MACHINE |
5.0 |
| 746 |
MS.MG.006 |
GEAR WHEEL, CHUCK, SHAFT |
5.0 |
| 747 |
MS.PD.024 |
SPARES FOR HT & LT S/S - CTS,PTS. |
5.0 |
| 748 |
MS.PD.039 |
SPARES FOR 1000 KVA & 166 KVA ENGS |
5.0 |
| 749 |
MS.PD.043 |
SPARES FOR S/S - PROTECTION. |
5.0 |
| 750 |
F.SD.103 |
MECHANICAL SEAL, CEP MHI DESIGN(144RND) |
35 |
| 751 |
TC.IN.063 |
SOLENOID VALVES FOR QCNRV, EXHAUST HOOD SPRAY ETC |
17.5 |
| 752 |
F.SD.128 |
CUTLESS RUBBER BEARING FOR CWP |
17.41 |
| 753 |
MS.PD.051 |
SPARES FOR HT S/S - CAPACITOR |
5.0 |
| 754 |
MS.PD.053 |
SPARES FOR LT S/S - CAPACITOR BANKS |
5.0 |
| 755 |
MS.QC.005 |
SPARES FOR TELEBRINNELER HARDNESS TESTER |
5.0 |
| 756 |
MS.TM.012 |
DP BOXES & CABLE JOINTING KITS |
5.0 |
| 757 |
MS.TM.017 |
INTERCOM SYSTEMS |
5.0 |
| 758 |
MS.TP.001 |
ALL TYPE OF TATA CRANES SERVICE SUPPORT & SPARE PARTS SUPPLIES |
5.0 |
| 759 |
MS.TP.013 |
SPARES FOR DE LOCOMOTIVE |
5.0 |
| 760 |
GT.SD.018 |
OIL SEALS / O-RINGS |
2.5 |
| 761 |
GT.CO.003 |
STEEL CASTING (GIB KEY, BLOCK ETC) |
2.77 |
| 762 |
H.SD.027 |
DEGASSER |
120 |
| 763 |
H.SD.001 |
PNEUMATIC WINCHES |
400 |
| 764 |
GT.SD.104 |
TBG-IV ITEMS-GTED-BASED ON M/S GENERAL ELECTRIC PART NUMBER |
200 |
| 765 |
GT.SD.109 |
SOLENOID VALVES-BASED ON M/S GENERAL ELECTRIC PART NUMBER |
25 |
| 766 |
K.CO.013 |
GRINDING ROLLS & BULL RING SEGMENT & AIRPORT ASSEMBLY. MPSP SYSTEM |
1926.5 |
| 767 |
K.CO.022 |
GRINDING ROLL AND BULL RING SEGMENT(7500 HRS) |
12506.9 |
| 768 |
K.FO.004 |
KNEE JOINT & SUPPORT PLATES |
6.6 |
| 769 |
K.IN.014 |
FLOW SWITCH |
5.0 |
| 770 |
K.IN.015 |
INSTRUMENT FOR YGP INDEX |
5.0 |
| 771 |
K.SD.001 |
ELECTRICAL ACTUATORS |
5.0 |
| 772 |
K.SD.004 |
SHELL BOLT ASSLY. |
5.0 |
| 773 |
K.SD.012 |
FLOW SIGHTS |
5.0 |
| 774 |
K.SD.017 |
PLASTIC PROTECTION CAP |
5.0 |
| 775 |
K.SD.018 |
EM BRAKE |
5.0 |
| 776 |
K.SD.033 |
RETAINING RINGS |
5.0 |
| 777 |
K.SD.036 |
GIRTH GEAR HOUSING SEAL AIR FAN |
5.0 |
| 778 |
K.SD.043 |
OILS & GREASES |
5.0 |
| 779 |
K.SD.047 |
TRUNION SHAFT BUSHING |
38.7 |
| 780 |
K.SD.055 |
GIRTH GEAR GREASING SYSTEMS |
5.0 |
| 781 |
K.SD.063 |
EDDY CURRENT DRIVE |
5.0 |
| 782 |
K.SD.066 |
CERAMIC TILES, VENTURI VANES, INNER CONES WITH TILES, CERAMIC PLUGS |
583.9 |
| 783 |
K.SD.071 |
ROD END |
5.0 |
| 784 |
K.SD.073 |
SPANNERS, WRENCHES ETC. |
5.0 |
| 785 |
K.SD.078 |
GEAR PUMP |
5.0 |
| 786 |
K.SD.080 |
4 BODIED & TWO BODIED PUMPS |
24.1 |
| 787 |
K.SD.090 |
HEAT TRACING SYSTEM |
5.0 |
| 788 |
K.SD.095 |
OIL PURIFICATION UNIT |
5.0 |
| 789 |
K.SD.119 |
PLANETARY GEAR BOX ASSLY. UPTO HP-1103 |
5.0 |
| 790 |
K.SD.120 |
NOZZLE ASSEMBLY |
43.7 |
| 791 |
K.SD.121 |
PLANETARY GEARBOX |
3346.2 |
| 792 |
K.SD.125 |
FABRICATED COMPONENTS OF MILLS XRP1043-1103 & HP 1103-1203 |
5.0 |
| 793 |
K.SD.126 |
FABRICATED COMPONENTS OF MILLS XRP 883-1003 |
5.0 |
| 794 |
K.SD.129 |
POWER BAND V-BELT |
5.0 |
| 795 |
K.SD.131 |
HYDRAULIC LOADING SYSTEM |
5.0 |
| 796 |
K.SD.132 |
BOWL MILL ASSEMBLIES |
76.8 |
| 797 |
K.SD.134 |
DYNAMIC CLASSIFIER |
5.0 |
| 798 |
K.SD.135 |
CERAMIC BALLS |
5.0 |
| 799 |
K.SD.143 |
PULVERISERS & MANDATORY SPARES |
5175.0 |
| 800 |
K.SD.165 |
PLANETARY GEAR BOX INTERNAL |
999.1 |
| 801 |
K.SD.166 |
2'TORQUE NUT, M64 TORQUE NUT, M56 TORQUE NUT |
48.9 |
| 802 |
K.SD.168 |
WIRE ROPE CABLE |
5.0 |
| 803 |
K.SD.169 |
HYDRAULIC TORQUE WERENCH |
55.5 |
| 804 |
K.SD.170 |
CIRCLIPS |
5.0 |
| 805 |
LT.CO.027 |
HP INNER CASING |
306.9 |
| 806 |
LT.FO.008 |
HOLLOW GUIDE BLADES |
8.8 |
| 807 |
LT.SD.002 |
LIFTING OIL PUMPS (SCREW TYPE JACKING OIL PUMP - VERTICAL) |
49.9 |
| 808 |
LT.SD.007 |
SPRING LOADED FULL FIT SAFETY RELIEF VALVE (JACKING OIL LINES) |
5.0 |
| 809 |
LT.SD.013 |
COMPENSATORS / BELLOWS |
12.2 |
| 810 |
LT.SD.014 |
COMPENSATORS / BELLOWS ( PRECISION ) |
5.0 |
| 811 |
LT.SD.015 |
SERVOMOTORS OF A. GLAND STREAM SUPPLY VALVE B. LEAK - OFF STEAM VALVE |
5.0 |
| 812 |
LT.SD.016 |
MAIN OIL PUMP IMPELLER |
6.3 |
| 813 |
LT.SD.017 |
STELLITE VALVE SPINDLES & VALVE CONCS., DIFFUSER |
15.9 |
| 814 |
LT.SD.019 |
GEAR COPULING BETWEEN HP ROTOR & MOP |
5.4 |
| 815 |
LT.SD.022 |
HIGH PRESSURE HOSES METALLIC / RUBBER HOSES |
5.0 |
| 816 |
LT.SD.024 |
HYDRAULIC JACK |
5.0 |
| 817 |
LT.SD.025 |
SLIDING PLATES / WASHERS ( * FORMERLY OILS CORPN. THRO MITSUI JAPAN ) |
5.0 |
| 818 |
LT.SD.029 |
ROD END / COUPLERS |
5.0 |
| 819 |
LT.SD.030 |
COLLINS PICK UP |
5.0 |
| 820 |
LT.SD.031 |
QUICK CLOSING NON RETURN VALVES FOR EXTRACTION AND CRH LINES |
5.0 |
| 821 |
LT.SD.033 |
TAG BINDER (IN GOVERING RACK) |
5.0 |
| 822 |
LT.SD.034 |
AUTOMATIC GROOVE RING |
5.0 |
| 823 |
LT.SD.035 |
ELECTRO HYDRAULIC CONVERTER |
5.0 |
| 824 |
LT.SD.036 |
SHAFT POSITION INDICATOR |
5.0 |
| 825 |
LT.SD.037 |
PRESSURE GAUGE VALVE |
5.0 |
| 826 |
LT.SD.040 |
MANN GAP TYPE FILTER, PLATE TYPE FILTERS |
5.0 |
| 827 |
LT.SD.041 |
STOP VALVE |
5.0 |
| 828 |
LT.SD.042 |
MOVING COIL, TERMINAL BLOCK |
5.0 |
| 829 |
LT.SD.043 |
BELLOW DIA 60 |
5.0 |
| 830 |
LT.SD.044 |
OIL ACCUMULATOR WITH CHARGING KIT |
5.0 |
| 831 |
LT.SD.045 |
SPECIAL THERMOCOUPLES FOR CASING METAL TEMPERATURE MEASUREMENT |
23.8 |
| 832 |
LT.SD.046 |
POSITION TRANSMITTERS |
5.0 |
| 833 |
LT.SD.047 |
LIMIT SWITCHES |
5.0 |
| 834 |
LT.SD.048 |
7 PIN RECEPTICLE, ADAPTOR |
5.0 |
| 835 |
LT.SD.050 |
STOP CUM CHECK VALVES |
5.0 |
| 836 |
LT.SD.051 |
ANGLE TYPE TURBINE DRAIN CONTROL VALVES |
5.0 |
| 837 |
LT.SD.052 |
SUPPORTS & CLIPS |
5.0 |
| 838 |
LT.SD.053 |
PIPE DAMPERS |
7.9 |
| 839 |
LT.SD.054 |
SPRAY NOZZLES (FOR TURBINE EXHAUST HOOD SPRAY) |
5.0 |
| 840 |
LT.SD.058 |
DISCO NON - RETURN VALVES |
5.0 |
| 841 |
LT.SD.062 |
DEMISTER( FLOW 100 CUBE METER) |
5.0 |
| 842 |
LT.SD.064 |
HYDRAULIC MOTOR, SHAFTS & FLANGES OF H.M |
36.6 |
| 843 |
LT.SD.065 |
OVER RUNNING CLUTCH |
5.0 |
| 844 |
LT.SD.066 |
VALVE ASSEMBLY |
5.3 |
| 845 |
LT.SD.067 |
INDUCTIVE PROBE, EXTN. CABLE, DIGITAL MONITOR |
5.0 |
| 846 |
LT.SD.068 |
CONNECTOR CASING, PIN CONTACT INSERT, |
5.0 |
| 847 |
LT.SD.072 |
FILTER ELEMENT |
5.0 |
| 848 |
LT.SD.074 |
EYE BOLT |
5.0 |
| 849 |
LT.SD.075 |
GRAPHINTE + CRNI STEEL GASKET |
5.0 |
| 850 |
LT.SD.076 |
COUPLING STUD, COUPLING ELBOW, ELBOW, ADJ. L-COUPLING, NIPPLE, UNION TEE, UNION, VALVE, NRV |
5.0 |
| 851 |
LT.SD.079 |
HP BREECH NUT HEATING DEVICE |
5.0 |
| 852 |
LT.SD.082 |
THREADED STUD, SPHERICAL BUSH, & CAP NUT |
5.0 |
| 853 |
LT.SD.083 |
ST+PTFE+PB SHEET |
5.0 |
| 854 |
LT.SD.084 |
NON-RETURN VALVE |
5.0 |
| 855 |
LT.SD.085 |
THROTTLE VALVE |
5.0 |
| 856 |
LT.SD.086 |
DILO BLIND, DILO UNION & UNION DILO |
5.0 |
| 857 |
LT.SD.089 |
UNION PG11 |
5.0 |
| 858 |
LT.SD.092 |
SHAFT NUT & LOCK WASHER |
5.0 |
| 859 |
LT.SD.094 |
DRY AIR PRESERVATION SYSTEM |
5.0 |
| 860 |
ST.PL.001 |
FLOW GLASS RINGS |
5.0 |
| 861 |
TC.GA.511 |
TUBE FITTINGS (SWAGE LOK TYPE) |
5.0 |
| 862 |
TC.IN.005 |
ANNUNCIATORS ( EXPLOSION PROOF ) |
5.0 |
| 863 |
TC.IN.006 |
ULTRASONIC FLOW METERS |
53.4 |
| 864 |
TC.IN.011 |
CONTROL PANELS (LOCAL / UNIT CONTROL PANELS, MARSHALLING CABINETS) |
155.5 |
| 865 |
TC.IN.013 |
CONTROL VALVES ( SELF ACTUATED DIFFERENTIAL PRESSURE CONTROL FOR SEAL OIL SERVICE) |
5.0 |
| 866 |
TC.IN.018 |
CONTROL VALVE ( SELF ACTUATED TEMPERATURE REGULATOR - WAX TYPE ) |
5.0 |
| 867 |
TC.IN.023 |
ELECTRIC HEATERS ( EXPLOSION PROOF ) |
16.5 |
| 868 |
TC.IN.024 |
ELECTRONIC GOVERNOR ( MICROPROCESSOR BASED ) |
369.2 |
| 869 |
TC.IN.025 |
ELECTRO PNEUMATIC CONVERTORS, ( I/P CONVERTORS) |
5.0 |
| 870 |
TC.IN.026 |
FLIP-FLAP BYPASS VALVE |
5.0 |
| 871 |
TC.IN.034 |
HYDRAULIC SPEED INDICATOR |
5.0 |
| 872 |
TC.IN.043 |
LIQUID DRAINER (SEAL OIL TRAP) |
5.0 |
| 873 |
TC.IN.045 |
LOCAL CONTROL STATIONS |
5.0 |
| 874 |
TC.IN.046 |
LEVEL SWITCHES (CAPACITANCE TYPE) |
5.0 |
| 875 |
TC.IN.047 |
LEVEL TRANSMITTER ( SMART ) (CAPCITANCE TYPE) |
5.0 |
| 876 |
TC.IN.067 |
SAFETY RELIEF VALVES |
5.0 |
| 877 |
TC.IN.068 |
SPEED MEASURING PROBES FOR ELECTRONIC GOVERNOR (BHEL- EDN, BANGALORE MAKE) |
17.9 |
| 878 |
TC.IN.071 |
SENTINEL WARNING VALVES |
5.0 |
| 879 |
TC.IN.078 |
TEMPERATURE SWITCHES |
5.0 |
| 880 |
TC.IN.080 |
TURBO SUPERVISORY INSTRUMENTS FOR VIBRATION, ECCENTRICITY, AXIAL DISPLACEMENT, DIFF.EXPANSION, CASIN |
1500.6 |
| 881 |
TC.IN.081 |
ACCESSORIES FOR TSI SYSTEM A) WORK STATION WITH / WITHOUT COMMUNICATION CARD B) LAPTOP COMPUTER F |
164.7 |
| 882 |
TC.IN.088 |
ITEMS OF ANTISURGE CONTROL SYSTEMS OF CCC |
5.0 |
| 883 |
TC.RM.002 |
BLADE PROFILES |
5.0 |
| 884 |
TC.RM.006 |
ALUMINIUM ALLOY ROUNDS & FLATS (>250MM & <300MM DIA.) |
5.0 |
| 885 |
TC.RM.007 |
ALUMINIUM ALLOY ROUNDS & FLATS (>300MM DIA.) |
5.0 |
| 886 |
TC.RM.009 |
COPPER & BRASS TUBES |
5.0 |
| 887 |
TC.RM.013 |
SS STEPTEDSTRIPS |
15.6 |
| 888 |
TC.RM.018 |
BLADE FLATS |
5.0 |
| 889 |
TC.RM.021 |
ALLOY STEEL BARS (HY11662) |
5.0 |
| 890 |
GT.PPMIV.015 |
ALUMINIDE COATING ON NOZZLES |
10 |
| 891 |
GT.SMIV.020 |
EXHAUST FRAME SS CLADDING |
20 |
| 892 |
GT.PPMIV.012 |
SHOT PEENING ON BUCKETS |
13 |
| 893 |
HY.TL.025 |
SPIRAL TAPS |
10 |
| 894 |
HY.TL.024 |
CARBIDE BALL NOSE END MILLS |
10 |
| 895 |
GT.PPMIV.016 |
VACUUM BRAZING OF HONEYCOMBS ON SHROUDS |
25 |
| 896 |
GT.SD.009 |
ACCESSORY & LOAD COUPLING WITH HARDWARE (FRAME 3, 5) GEAR TYPE |
18.75 |
| 897 |
K.IN.017 |
LEVEL SWITCH SEAL AIR HEADER |
40 |
| 898 |
GT.PPMIV.013 |
ALUMINIUM COATING ON BUCKETS |
3.2 |
| 899 |
HY.TL.090 |
VERNON TUBE EXPANDERS |
10 |
| 900 |
K.SC.051 |
HP 1203 SEPARATOR BODY -MACHINING |
42.5 |
| 901 |
GT.FO.003 |
ALUMINUM FORGINGS |
1 |
| 902 |
WE.10.010 |
CARBON GOUGING RODS |
1.2 |
| 903 |
GT.GE.030 |
UNISTRUCT CHANNELS, CLAMP LOOPS, CLAMP PIPES, HOSE CLAMP ETC. |
2.5 |
| 904 |
GT.SD.111 |
FR.P LOAD COUPLING HARDWARE |
87.18 |
| 905 |
GT.SD.130 |
TOOLS AND FIXTURES FOR IB ASSEMBLY |
60 |
| 906 |
D.SD.010 |
VACCUM PUMP AND/OR PRIMING PUMP |
|
| 907 |
H.SD.213 |
SAFETY CLAMPS |
96 |
| 908 |
H.SD.020 |
AIR COMPRESSOR |
160 |
| 909 |
H.SD.178 |
HYDRAULIC CASING TONG |
144 |
| 910 |
H.SD.097 |
HIGH PRESSURE MUD HOSE |
80 |
| 911 |
H.SD.258 |
CENTRIFUGAL PUMPS |
128 |
| 912 |
H.SD.180 |
HP TEST UNIT |
64 |
| 913 |
F.CO.046 |
IMPELLER ( FEED BOOSTER PUMP WEIR DESIGN ) |
200 |
| 914 |
GT.GA.010 |
LUBE OIL CONDITIONER |
20 |
| 915 |
IT.SD.142 |
WIRE ROPES1 |
1 |
| 916 |
H.SD.025 |
CORK RUBBER SHEET. |
1 |
| 917 |
H.SD.021 |
10T GEARED TRAVEL TYPE TROLEY WITH HOIST |
5 |
| 918 |
IT.SD.100 |
MOLYKOTE PASTE |
10 |
| 919 |
GT.SD.125 |
GAS TURBINE EXTERNAL INSULATION |
10 |
| 920 |
GT.SMIV.004 |
EXHAUST FRAME (FR-5/6) |
13.2 |
| 921 |
GT.SD.089 |
K SPEC SLINGS |
1 |
| 922 |
HY.TL.019 |
SURFACE GRIDING WHEELS |
0.00 |
| 923 |
GT.SD.006 |
ACCESSORY & LOAD COUPLNG FR5 & 6, COUPLING HARDWARE FR5 |
7.5 |
| 924 |
GT.GE.045 |
DIFFERENTIAL PRESSURE GUAGES |
1.45 |
| 925 |
F.SD.100 |
MECHANICAL SEAL FOR BP,MLC450X350H |
50 |
| 926 |
H.SD.225 |
MASTER BUSHING |
120 |
| 927 |
H.SD.196 |
JET SHEARING DEVICE |
75 |
| 928 |
H.SD.068 |
HIGH PRESSURE GAUGES |
8 |
| 929 |
H.SD.168 |
FOSV & IBOP |
56 |
| 930 |
H.CO.003 |
DRUM SPOOL |
40 |
| 931 |
H.SD.194 |
F L P PUSH BUTTON STATION. |
1 |
| 932 |
GT.SD.131 |
ACCESSORY COUPLING FR5&6, COUPLING HARDWARE FR5 |
2.1 |
| 933 |
G.CO.016 |
SGI CASTINGS 15180406618, 15181001044, 15184007602A, 25185006569, 25180406640, 35180506802-A, 35180 |
5.0 |
| 934 |
CM.SD.003 |
GEAR COUPLING |
5.0 |
| 935 |
CM.SD.005 |
THRUST BEARINGS |
46.0 |
| 936 |
CM.SD.006 |
JOURNAL BEARING TILTING PAD TYPE |
162.8 |
| 937 |
CM.SD.010 |
OIL SEALS (HP / LP) |
25.4 |
| 938 |
CM.SD.011 |
OIL MECHANICAL SEAL |
5.0 |
| 939 |
CM.SD.013 |
LEAF SPRINGS |
5.0 |
| 940 |
CM.SD.015 |
STAINLESS STEEL BELLOWS FOR COUPLING GUARD |
5.0 |
| 941 |
CM.SD.017 |
AREXON MOTOR SIL |
5.0 |
| 942 |
CM.SD.019 |
COLUMNOY BUSH |
5.0 |
| 943 |
CM.SD.020 |
OIL INJECTION PUMP |
5.0 |
| 944 |
CM.SD.023 |
SEAL OIL PUMPS (UPTO 25 KG/M.SQ.) AND ITS RELIEF VALVE (SCREW) |
5.0 |
| 945 |
CM.SD.024 |
SEAL OIL PUMPS (MORE THAN 25 KG/CM.SQ.) AND ITS RELIEF VALVE (SCREW TYPE) |
5.0 |
| 946 |
CM.SD.025 |
OIL PURIFIER FIXED TYPE (FOR MOUNTING ON OIL TANK) |
5.0 |
| 947 |
CM.SD.026 |
OIL PURIFIER (FOR MOUNTING SEPARATELY FROM OIL TANK) |
26.9 |
| 948 |
CM.SD.031 |
COUPLING (MULTI MEMBRANE TYPE) FOR OIL PUMPS |
5.0 |
| 949 |
CM.SD.032 |
COUPLING (RUBBER PAD TYPE) |
5.0 |
| 950 |
CM.SD.033 |
TRANSFLOW VALVES |
5.0 |
| 951 |
CM.SD.034 |
PAPER FILTERS CARTRIDGES |
5.0 |
| 952 |
CM.SD.038 |
LUBE OIL CONSOLE |
7.2 |
| 953 |
CM.SD.040 |
GAS FILTERS |
15.4 |
| 954 |
CM.SD.041 |
SPECIAL NON-RETURN VALVE IN CO2 COMPRESSOR DISCHARGE (HOERBIGER) |
5.0 |
| 955 |
CM.SD.045 |
3-D IMPELLERS FOR COMPRESSORS |
4415.7 |
| 956 |
CM.SD.046 |
SPECIAL NON-RETURN VALVE (TILTING DISC TYPE) IN COMPRESSOR DISCHARGE |
5.0 |
| 957 |
CM.SD.047 |
DIVERTOR VALVES |
5.0 |
| 958 |
CM.SD.049 |
HYD. CYLINDERS WITH ACCESSORIES (ENERPACK EQPT.) |
5.0 |
| 959 |
CM.SD.050 |
SERRATED WASHERS |
5.0 |
| 960 |
CM.SD.052 |
COMPRESSOR WALKWAY |
5.0 |
| 961 |
CM.SD.053 |
STORAGE UNIT FOR COMPRESSOR ROTOR |
15 |
| 962 |
CM.SD.054 |
HYDRAULIC COUPLING |
5.0 |
| 963 |
CM.SD.055 |
DIAPHARAGM COUPLINGS |
5.0 |
| 964 |
CM.SD.056 |
AUXILIARY STEAM TURBINES (VERTICAL) |
5.0 |
| 965 |
CM.SD.057 |
NITROGEN BOTTLE BANK & CONTROL SKID |
5.0 |
| 966 |
CM.SD.058 |
ABRADABLE SEAL |
5.0 |
| 967 |
CM.SD.059 |
BOLT TENSIONING EQUIPMENT |
5.0 |
| 968 |
F.CO.002 |
DIFFUSER & END DIFFUSER ( BFP SIGMA DESIGN ) |
5.0 |
| 969 |
F.CO.004 |
INFLOW SPRIAL ( BFP SIGMA DESIGN ) |
5.0 |
| 970 |
F.CO.008 |
DISTANCE BUSH,BUSH(LOCK NUTS) ( BFP SIGMA DESIGN) |
5.0 |
| 971 |
F.CO.009 |
THRUST BRG. COVER SPRAY RING (BFP SIGMA DESIGN) |
5.0 |
| 972 |
F.CO.022 |
BEARING PAN,BEARING COVER, PR.GUAGE STAND, LANTERN SHAFT SLEEVE, STAGE BODY. BUSH, SHAFT BUSHING INF |
5.0 |
| 973 |
F.CO.073 |
IMPELLER & DIFFUSER (250/270 MW BFP WEIR DESIGN) |
5.0 |
| 974 |
F.CO.075 |
IMPELLER & DIFFUSER (600 MW BFP WEIR DESIGN) |
5.0 |
| 975 |
F.CO.079 |
IMPELLER, BOILER FEED PUMP (MDG405, MDG346) |
44.6 |
| 976 |
F.CO.080 |
INNER CASING, BOILER FEED PUMP (MDG405, MDG346) |
5.0 |
| 977 |
F.CO.082 |
IMPELLER, BOILER FEED BOOSTER PUMP ( MLC 400 X 300H) |
161.4 |
| 978 |
F.CO.084 |
IMPELLER, CONDENSATE EXTRACTION PUMP (144 RND) |
260.0 |
| 979 |
F.CO.088 |
IMPELLAR, BOILER FEED PUMP (MDG455) |
5.0 |
| 980 |
F.CO.089 |
INNER CASING, BOILER FEED PUMP (MDG455) |
5.0 |
| 981 |
F.CO.091 |
IMPELLAR, BOILER FEED BOOSTER PUMP ( MLC 450 X 350H) |
5.0 |
| 982 |
F.IN.007 |
VIBRATION MEASURING EQUIPMENT, AXIAL SHIFT INDICATOR, REVERSE ROTATION INDICATOR |
656.6 |
| 983 |
F.IN.019 |
LOCAL CONTROL PANEL |
5.0 |
| 984 |
F.IN.020 |
CABINET AND ACCESSORIES FOR VMS AND RRI |
5.0 |
| 985 |
F.SD.007 |
RUBBER LINED BEARINGS |
65.3 |
| 986 |
F.SD.013 |
MECHANICAL SEAL SKID FOR BOOSTER PUMP, BFP |
275.1 |
| 987 |
F.SD.018 |
HYDRAULIC COUPLING FOR 500 & 600 MW BFPS & 30% DUTY MHI BFPS |
1371.1 |
| 988 |
F.SD.022 |
THRUST BRG.(TILTING PAD) ( BFP SIGMA DESIGN ) 200KHI/ 150KHI |
53.2 |
| 989 |
F.SD.024 |
IMPELLER ABUTMENT RING, SEAL ABUTMENT RING ( BFP WEIR DESIGN ) 41803813150, 31804013363 |
5.0 |
| 990 |
F.SD.027 |
AIR BREATHER |
5.0 |
| 991 |
F.SD.028 |
COPPER COATED GASKET |
8.8 |
| 992 |
F.SD.034 |
THRUST CUM JOURNAL BEARING (TILTING PAD TYPE ) (CEP, & CWP, WEIR DESIGN PUMPS |
354.4 |
| 993 |
F.SD.043 |
BOLT HEATING ELEMENTS |
5.0 |
| 994 |
F.SD.044 |
LEFT & RIGHT SEGMENTS |
5.0 |
| 995 |
F.SD.045 |
SPRINGS, ( 4-50-0461, 41881610015 ) |
5.0 |
| 996 |
F.SD.048 |
THRUST BRG. FOR BFP (FK6D30) (DRAWING NO. 11805714107) |
5.0 |
| 997 |
F.SD.052 |
THRUST BEARING FOR BP FA1B56 |
5.0 |
| 998 |
F.SD.058 |
OIL LEVEL INDICATOR |
5.0 |
| 999 |
F.SD.062 |
ALUMINIUM PACKING |
5.0 |
| 1000 |
F.SD.063 |
SHIMS |
5.0 |
| 1001 |
F.SD.064 |
TENMAT, FEROFORM, LOWFRICTION & DRYSTART BRG FOR CWP |
114.4 |
| 1002 |
F.SD.066 |
OIL CENTRIFUGE |
13.0 |
| 1003 |
F.SD.067 |
AUTOMATIC RECIRCULATION VALVE |
5.0 |
| 1004 |
F.SD.072 |
PISTON RINGS |
5.0 |
| 1005 |
F.SD.078 |
BFP FK6D30 210 MW CATRIDGE (STANDARD), BP FA1B56 210 MW PUMPS, CEP MODELS EN XH & XJ, COMPONENTS & S |
5.0 |
| 1006 |
F.SD.079 |
THRUST BEARING (BFP FK4E36 WEIR DESIGN) |
57.7 |
| 1007 |
F.SD.080 |
THRUST BEARING (BP FA1B75 WEIR DESIGN) |
44.5 |
| 1008 |
F.SD.087 |
O RINGS & BACKUP RINGS FOR MHI BFPS |
5.0 |
| 1009 |
F.SD.091 |
MSW GASKETS FOR MHI BFPS |
5.0 |
| 1010 |
F.SD.092 |
O RINGS FOR MHI BOOSTER PUMPS |
5.0 |
| 1011 |
F.SD.095 |
SPIRAL WOUND GASKET FOR CASING, BOILER FEED PUMP (MDG455) |
5.0 |
| 1012 |
F.SD.096 |
O RING, BOILER FEED PUMP (MDG455) |
5.0 |
| 1013 |
F.SD.098 |
THRUST CUM JOURNAL BEARING FOR CEP 144RND & CWP-72MN, 78MN (MHI DESIGN) |
446.5 |
| 1014 |
F.SD.101 |
GASKET FOR CASING, BOILER FEED BOOSTER PUMP ( MLC 450 X 350H) |
5.0 |
| 1015 |
F.SD.102 |
O RINGS FOR MHI CEPS |
5.0 |
| 1016 |
F.SD.106 |
MECHANICAL SEAL, BOILER FEED PUMP (MDG405, MDG346) |
171.1 |
| 1017 |
F.SD.107 |
SPIRAL WOUND GASKET FOR CASING, BOILER FEED PUMP (MDG405, MDG 455 &MDG346) |
5.0 |
| 1018 |
F.SD.112 |
MECHANICAL SEALS (FOR WEIR DESIGN BFPS FK4E36, FOR 500 TO 600 MW) |
60.3 |
| 1019 |
F.SD.113 |
MECHANICAL SEALS (FOR DESIGN BOOSTER PUMPS FA1B75, FOR 500 TO 600 MW) |
13.1 |
| 1020 |
F.SD.114 |
MECHANICAL SEALS (FOR CEPS EN8H32, EN5J40/210, EN5J40/500, 150CJNV AND 150 CJAV, UPTO 600MW) |
9.0 |
| 1021 |
F.SD.115 |
MECHANICAL SEALS (FOR SIGMA DESIGN BFPS 150 KHI, 200 KHI AND 200KHI/S) |
65.4 |
| 1022 |
F.SD.117 |
MULTI DISC, FLEXIBLE COUPLINGS, FOR MHI BFPS, 660 TO 800 MW |
5.0 |
| 1023 |
F.SD.120 |
PUMPS AND CKD COMPONENTS FROM COLLABORATOR MHI |
539.8 |
| 1024 |
F.SD.121 |
HYDRAULIC COUPLING FOR 50% DUTY MHI BFPS (660 MW AND ABOVE) |
3761.3 |
| 1025 |
F.SD.122 |
LINE SHAFT BEARING FOR CWP 72MN & 78MN (MHI DESIGN) |
5.0 |
| 1026 |
F.SD.124 |
PUMP COMPONENTS FROM EMRP MUMBAI |
5.0 |
| 1027 |
F.SD.126 |
VARIABLE SPEED HYDRAULIC COUPLINGS FOR 110, 210, 250, & 270 MW PROJECTS |
5.0 |
| 1028 |
G.CO.001 |
SGI CASTINGS (SF6) 1518 4007 601A, 1518 0406 618-A, 1518 3005 726, 1518 3005 727, 3518 1001 088 |
5.0 |
| 1029 |
G.CO.003 |
SGI CASTINGS (MOCBS) 1639 335-1 1644 654-1 1645739-2 1695 465-1 1655 681-4 5251 702-1 |
5.0 |
| 1030 |
G.CO.004 |
GREY IRON CASTINGS(MOCBS) 1608 311-1 1618 891-15 1623 672-1 1633 672-3 1644 792-2 1645 746-1 |
5.0 |
| 1031 |
G.CO.005 |
PRECISION CASTINGS(SF6) 1518 4007 348 2518 4005 342 2518 4007 349 2518 2001 603B 2518 2001 604 2518 |
5.0 |
| 1032 |
G.CO.008 |
ALUMINIUM CASTINGS 1518 5050 004 |
5.0 |
| 1033 |
G.CO.009 |
ALUMINIUM CASTINGS 1518 4007 322 |
5.0 |
| 1034 |
G.CO.011 |
AL.CASTINGS 35182001488 |
5.0 |
| 1035 |
G.CO.012 |
COPPER BASE ALLOY CASTINGS(TIN,BRONZE, LEADED GUN METAL CASTINGS ETC.) CAST TUBES 639 568-7 1623 585 |
5.0 |
| 1036 |
G.CO.013 |
CENTRIFUGAL TIN BRONZE CASTINGS(MOCBS) 5419 129-1 |
5.0 |
| 1037 |
G.CO.014 |
SGI CASTINGS(SF6) 15180407625 |
5.0 |
| 1038 |
G.CO.015 |
CASTING BODY GAS CONTROL VALVE |
5.0 |
| 1039 |
G.SD.046 |
OIL LEVEL GAUGE GLASS & REFLECTION GLASSES. D9565209-1 |
5.0 |
| 1040 |
G.SD.047 |
OPERATIONAL ANALYSER. |
5.0 |
| 1041 |
G.CO.133 |
LIMIT SWITCHES |
5.0 |
| 1042 |
G.FO.003 |
FORGINGS (MOCBS) 35293003001 35293003002 35293003003 35293003005 2183 2051-103 2184 917-1 C9585 319- |
5.0 |
| 1043 |
G.GE.001 |
AUX.SWITCHES 1604670-G 25188001430-A 25188006230-A 25188006231-A |
5.0 |
| 1044 |
G.GE.003 |
CABLE GLANDS C9585852-3 |
5.0 |
| 1045 |
G.GE.005 |
CAPACITOR TRIPPING DEVICE D9565643 |
5.0 |
| 1046 |
G.GE.007 |
CONTROL SWITCH SG50010 45183007208 |
5.0 |
| 1047 |
G.GE.008 |
DOOR SWITCH C9585522-1 C9585708-3 |
5.0 |
| 1048 |
G.GE.010 |
ELECTROLYTIC CAPACITOR C9585759 C9585707 RECTIFIER C9585710 |
5.0 |
| 1049 |
G.GE.012 |
HEATERS AND RESISTORS ASSY. 45182006494 25182001458B 25182001458C 35182003450-A 35182003450-B C95853 |
5.0 |
| 1050 |
G.GE.013 |
LIMIT SWITCH 5661338-1 |
5.0 |
| 1051 |
G.GE.014 |
TRIPPING AND CLOSING MAGNET ASSY. 25184506380-A 25184506380-B 25184506380-C 25184606350-A 4529020701 |
5.0 |
| 1052 |
G.GE.016 |
MOTOR (SF6) 25182001477B |
5.0 |
| 1053 |
G.GE.017 |
OPERATING COILS(MOCBS) OPERATING COILS(SF6) 5274761-G 5274761-L |
5.0 |
| 1054 |
G.GE.018 |
ELECTRO-MAGNETIC PROTECTIVE RELAYS, AUXILIARY&TRIPPING RELAYS,STATIC RELAYS, CONTROL SWITCHES FOR CO |
5.0 |
| 1055 |
G.GE.019 |
PRESSURE SWITCH 15182001,421 |
5.0 |
| 1056 |
G.GE.023 |
ROTARY SWITCHES D9565261-2 D9565261-4 C9585728-1 C9585840-1 |
5.0 |
| 1057 |
G.GE.024 |
SHORTING LINKS & TERMINAL STUDS |
5.0 |
| 1058 |
G.GE.025 |
SNAP SWITCH 35182001483 |
5.0 |
| 1059 |
G.GE.026 |
STARTERS C9585264-2 C9585264-3 C9585264-4 C9585264-5 C9585264-6 |
5.0 |
| 1060 |
G.GE.028 |
TIMER C9585750-2 SG90129 C9585817-1 C9585817-2 |
5.0 |
| 1061 |
G.GE.029 |
THERMOSTAT 4529003014 SG50016001 |
5.0 |
| 1062 |
G.GE.033 |
UNIVERSAL MOTORS 25292055025 44600010-1 44600010-2 C9585413 ESK2629-1 ESK2629-2 45292005001 |
5.0 |
| 1063 |
G.GE.034 |
WIRE WOUND RESISTORS C9585705-1 SG51143-7 SG51143-08 C9585310-1 C9585310-2 C9585310-3 |
5.0 |
| 1064 |
G.GE.038 |
CONTROL VALVES SG52017 SG52018 |
5.0 |
| 1065 |
G.GE.039 |
PNEUMATIC INDICATING CON- TROLLER, PNEUMATIC DIFF. PRESSURE TRANSMITTER SG52065 |
5.0 |
| 1066 |
G.GE.040 |
FILTER REGULATORS SG52020 |
5.0 |
| 1067 |
G.GE.041 |
ELECTRONIC DIFF.PRESSURE TRANSMITTER |
5.0 |
| 1068 |
G.GE.042 |
ON/OFF VALVES (SOLINOID) |
5.0 |
| 1069 |
G.GE.043 |
BALL VALVES SG52019 |
5.0 |
| 1070 |
G.GE.044 |
FLOW CONTROL VALVES |
5.0 |
| 1071 |
G.GE.045 |
REDUCER CONDUIT ETC. |
5.0 |
| 1072 |
G.GE.048 |
RELAYS ELECT MECHANICAL & STATIC C9585750-2 |
5.0 |
| 1073 |
G.GE.049 |
MINIATURE CIRCUIT BREAKERS D9565674-2 SG40118 SG40119 SG40120 SG40121 |
5.0 |
| 1074 |
G.GE.050 |
PRESSURE SWITCH |
5.0 |
| 1075 |
G.GE.051 |
FL NUT |
5.0 |
| 1076 |
G.GE.052 |
FUSE TERMINAL SG52041 |
5.0 |
| 1077 |
G.GE.054 |
DC OPERATED ELECTRONIC TIMER SG90218-02,SG90218-01 |
5.0 |
| 1078 |
G.GE.055 |
SPARE COIL FOR SOLENOID VALVE PART NO:19200002 |
5.0 |
| 1079 |
G.HW.002 |
STANDARD BOLTS & NUTS (HOT DIP GALVINISED) SG90105007 SG90106004 SG90106005 SG90106006 SG90106007 SG |
5.0 |
| 1080 |
G.HW.004 |
SPRING WASHERS 21542012-124 21542012-146 21542012-153 21542012-165 21542012-173 21542012-178 2154201 |
5.0 |
| 1081 |
G.HW.005 |
NYLOCK NUTS 21262801-110 21262801-112 21262801-115 21262801-116 21262801-117 21262801-120 21262801-1 |
5.0 |
| 1082 |
G.HW.007 |
PRESS COMPONENTS (WASHERS & SHIMS) AND PUNCHED WASHERS SG90110001 SG90110002 SG90110004 21512061-205 |
5.0 |
| 1083 |
G.HW.013 |
STUDS WITH FERRULES 21222651-139 |
5.0 |
| 1084 |
G.HW.021 |
NIPPLES 25452021-26 C9585065-2 |
5.0 |
| 1085 |
G.HW.022 |
ROLL PIN 21112835-168 21112835-205 21112835-208 21112835-210 21112835-256 21112835-260 21112835-261 |
5.0 |
| 1086 |
G.HW.023 |
E-RING 21542525-109 21542525-118 21542526-114 21542526-116 21542526-118 21542526-122 21542526-126 21 |
5.0 |
| 1087 |
G.RM.004 |
ALUMINIUM PIPES (ABOVE 100MM OD) |
5.0 |
| 1088 |
G.RM.005 |
ALUMINIUM PLATE (UPTO 40MM) |
5.0 |
| 1089 |
G.RM.009 |
AL.ROUNDS & SQUARES (ABOVE 100MM) |
5.0 |
| 1090 |
G.RM.011 |
BEARING TUBE |
5.0 |
| 1091 |
G.RM.015 |
COPPER FOIL 0.1 & 0.2 THK. |
5.0 |
| 1092 |
G.RM.017 |
COPPER PROFILES 1554 1940-1 1554 1955-1 |
5.0 |
| 1093 |
G.RM.019 |
COPPER SHEETS. |
5.0 |
| 1094 |
G.RM.020 |
CORK SHEET. 3MM THICK |
5.0 |
| 1095 |
G.RM.022 |
FERRITE MANGANESE STEEL (2MM & 3MM) |
5.0 |
| 1096 |
G.RM.023 |
G.I.SHEET 2MM THK. |
5.0 |
| 1097 |
G.RM.024 |
NYLON RODS DIA 25MM DIA 50MM |
5.0 |
| 1098 |
G.RM.025 |
NYLON ROPES 1633 4554-A 1634 128-A |
5.0 |
| 1099 |
G.RM.027 |
PHOSPHUR BRONZE RODS AND ALUMINIUM BRONZE ROD |
5.0 |
| 1100 |
G.RM.028 |
PERSPEX SHEET. |
5.0 |
| 1101 |
G.RM.029 |
PTFE BUSHES DIA 125MMX85ID DIA 100MMX63ID SG40112-2 SG40112-3, INSULATING BUSH DRG. NO. 4515007538 |
5.0 |
| 1102 |
G.RM.030 |
SILVER BASE COPPER TUBE |
5.0 |
| 1103 |
G.RM.031 |
T-SECTIONS 50X50X6 |
5.0 |
| 1104 |
G.RM.034 |
BR WIRE MESHAO |
5.0 |
| 1105 |
G.RM.035 |
CORRUGATED SHEET 3 PLY |
5.0 |
| 1106 |
G.RM.038 |
TIN BRONZE ROD DIA 45 |
5.0 |
| 1107 |
G.SD.001 |
ACCUMULATOR TUBE 25183005190 25183003190 25183007190 |
5.0 |
| 1108 |
G.SD.002 |
SF6 VOLUME CONTENT MEASURING DEVICE. |
5.0 |
| 1109 |
G.SD.003 |
BALL BEARINGS & NEEDLE BEARING BUSH SG90003001 22131000-206 22134984-4 22134984-6 22134984-7 221320 |
5.0 |
| 1110 |
G.SD.005 |
BI-METALLIC BUSHES 22112031 D9565055-7 |
5.0 |
| 1111 |
G.SD.007 |
CABINETS & SHEET METAL COMPONENTS 0518 2001 15182001301B 15182001301C 15182001301D 2518 7007 426-A |
5.0 |
| 1112 |
G.SD.008 |
NON RET. VALVE SG 50003 |
5.0 |
| 1113 |
G.SD.009 |
CHAINS 2182704-2 2182704-3 ESK2611 4529 3007 001 4529 0607 001 C9585 491-1 C9585235-1 |
5.0 |
| 1114 |
G.SD.012 |
CONTACT TUBE & GUIDE TUBE 2518 5006 522 2518 5007 518A 2518 5007 518B |
5.0 |
| 1115 |
G.SD.013 |
COPPER TUNGSTON CONTACTS. 45180406666 2658982-B 45133012003 2658917-10, 1644718-A |
5.0 |
| 1116 |
G.SD.015 |
COUNTERS C9585 123-1 C9585 266-1 |
5.0 |
| 1117 |
G.SD.016 |
COUNTERS 45182001456A 45182001456B 45182001456C |
5.0 |
| 1118 |
G.SD.017 |
CAP NUT 45182001387 |
5.0 |
| 1119 |
G.SD.018 |
COUPLINGS (ELBOW) 45184007330-A 45184007329-A |
5.0 |
| 1120 |
G.SD.020 |
T COUPLING (ELBOW) SG90027, T-JOINT ERMETO PART NO. EVL6-PS, SG90023-2 |
5.0 |
| 1121 |
G.SD.022 |
COUPLINGS SG90162 SG90172 SG90169 SG90173 SG90170 SG90177 SG90207 |
5.0 |
| 1122 |
G.SD.023 |
COUPLINGS SG90081 SG90082 4518 2006 492 SG90086 |
5.0 |
| 1123 |
G.SD.024 |
DENSITY MONITOR SG5001201 SG5001202 SG50012002 SG50012003 SG90222 |
5.0 |
| 1124 |
G.SD.027 |
FRICTION BLOCKS 2281 072-1 |
5.0 |
| 1125 |
G.SD.029 |
GRAPHITE NOZZLES 35185005517 35185006517 35185006522 45185001753 45185001768 45185001774 45185003774 |
5.0 |
| 1126 |
G.SD.030 |
GRAPHITE PLATE 145180406642 |
5.0 |
| 1127 |
G.SD.031 |
GAS FILLING AND EVACUATION EQPT. SG40002 SG40096 |
5.0 |
| 1128 |
G.SD.032 |
NITROGEN GAS FILLING EUIPMENT |
5.0 |
| 1129 |
G.SD.033 |
GEAR BOX 3518 2001 487 |
5.0 |
| 1130 |
G.SD.034 |
GUIDE RINGS & PISTON GUIDE RINGS. SG90067002 SG90067003 45184005360 45182001617 45184007372 45184003 |
5.0 |
| 1131 |
G.SD.035 |
HOSE PIPE FLEXIBLE AND CLAMPS. SG90080001 SG90080002 SG90029001 C9585293 45180501868 25292031-10 |
5.0 |
| 1132 |
G.SD.036 |
SF6 HOSE PIPES & REGULATORS. |
5.0 |
| 1133 |
G.SD.038 |
MOISTURE / DEW POINT METER. SG40003 |
5.0 |
| 1134 |
G.SD.039 |
INTERLOCKS C9 585 153 C9 585 164 C9 585 375 C9585885 C9585887 |
5.0 |
| 1135 |
G.SD.041 |
LEAK DETECTOR SF6 TIF5000/LF7039 SG40007 |
5.0 |
| 1136 |
G.SD.043 |
MAINTENANCE UNIT (SF6). |
5.0 |
| 1137 |
G.SD.044 |
MULTI CONTACT PIECE 4518 0406 663 |
5.0 |
| 1138 |
G.SD.045 |
NON-RETURN VALVE 3518 3001 182A |
11.0 |
| 1139 |
G.SD.048 |
PERMANANT MAGNET 4518 3007 224 4518 3007290 4518 3007291 SG90099 |
5.0 |
| 1140 |
G.SD.049 |
PIN 4518 2001 623 |
5.0 |
| 1141 |
G.SD.050 |
PLUNGERS 4518 2001 644 4518 2001 645 |
5.0 |
| 1142 |
G.SD.051 |
PR. GAUGES 5298 878-6 5298 878-8 |
5.0 |
| 1143 |
G.SD.052 |
PRECISION PR.GAUGES SG90221, SG90223 |
5.0 |
| 1144 |
G.SD.053 |
PUMP (SF6) SG90074 |
7.1 |
| 1145 |
G.SD.054 |
RESISTOR DISC 35180406662 |
5.0 |
| 1146 |
G.SD.055 |
RUP. DISC 45181001059 |
5.0 |
| 1147 |
G.SD.057 |
SINTERED FILTER 35185006590 45181006023 45182001508 45184007418 2590710-1 2590711-1 4529400716 |
5.0 |
| 1148 |
G.SD.059 |
SPIRAL WASHERS 1646930-1 1646422-1 |
5.0 |
| 1149 |
G.SD.060 |
SPACE RING & SUPPORT RING 45182001617 45184005360 |
5.0 |
| 1150 |
G.SD.062 |
STICKERS SG90199 SG90200 SG90203 35180005960A 35181001160B C9585652-1 C9585856 C9585859 35180005961 |
5.0 |
| 1151 |
G.SD.063 |
SEALS, STEP SEALS WITH O RING, TURCON EXCLUDER. |
5.0 |
| 1152 |
G.SD.065 |
VIEWING GLASS 2911704-1 25188006210 35184005376 |
5.0 |
| 1153 |
G.SD.066 |
V-RING 2216205116 5661338A C9585840-1 |
5.0 |
| 1154 |
G.SD.067 |
WASHER (DISC) 45134012214 45134012219 5419166-8 45134012202 |
5.0 |
| 1155 |
G.SD.068 |
WASHER 45185006587 |
5.0 |
| 1156 |
G.SD.069 |
WASHER (PR.) 2151907-9 |
5.0 |
| 1157 |
G.SD.070 |
WASHER (TEETHED) 21542052 |
5.0 |
| 1158 |
G.SD.071 |
WASHER (PERFORATED) 35185006540 |
5.0 |
| 1159 |
G.SD.073 |
MOLYKOTE HY5740061016 HYN799995456 |
5.0 |
| 1160 |
G.SD.074 |
HYDRAULIC OIL. HY5710061018 HY5710061026 |
17.2 |
| 1161 |
G.SD.075 |
PAINTS AA5610001013 AA5610003016 AA5610031206 AA5610031214 AA5610031222 AA5610031567 AA5610005663 AA |
5.0 |
| 1162 |
G.SD.081 |
INSULATORS (SF6) 1518 0105 703 |
5.0 |
| 1163 |
G.SD.083 |
INSULATORS (SF6) 2518 5006 710B 25180406715 |
5.0 |
| 1164 |
G.SD.085 |
COPPER SPIRAL SPRINGS 1601186-5 |
5.0 |
| 1165 |
G.SD.088 |
LEAF SPRING 2191704-1 |
5.0 |
| 1166 |
G.SD.089 |
LEAF SPRING 45185006338 45185006550 45185006552 45185006538 |
5.0 |
| 1167 |
G.SD.091 |
HELICAL SPRINGS SG90006001 SG90008001 |
5.0 |
| 1168 |
G.SD.092 |
HELICAL SPRINGS SG900007023 SG900007024 |
5.0 |
| 1169 |
G.SD.093 |
TORSION SPRING SG90006001 SG90007001 SG90007002 SG90007006 SG90007007 SG90007008 SG90007009 SG900070 |
5.0 |
| 1170 |
G.SD.095 |
BLAST CYLINDER 25185003731 & 5185050013A |
5.0 |
| 1171 |
G.SD.096 |
FIBRE GLASS COMPONENTS (MOCBS) 2684849-1 2684854-1 2684887-1 D9565287-1 1646925-1 1646932-1 1639046- |
5.0 |
| 1172 |
G.SD.097 |
GUIDE RING (FABRIC BASE) 45185006571 45180501809 45180406645 ESK-2985 |
5.0 |
| 1173 |
G.SD.099 |
HOUSING TUBE 35180406653 35180406654 |
5.0 |
| 1174 |
G.SD.100 |
NYLON MESH 45184007327 45184005327 45181006013 |
5.0 |
| 1175 |
G.SD.101 |
OPERATING ROD 35180550006 15180507520A, 25180605775-A |
5.0 |
| 1176 |
G.SD.102 |
OPERATING ROD 35180501812B 35180501812A |
5.0 |
| 1177 |
G.SD.103 |
PLASTIC KNOB 45182003425 |
5.0 |
| 1178 |
G.SD.107 |
DRAIN VALVES 2541701 |
5.0 |
| 1179 |
G.SD.108 |
RTV732 SILICONE HY5530064011 HY5530072011 |
5.0 |
| 1180 |
G.SD.110 |
SILICA GEL |
5.0 |
| 1181 |
G.SD.112 |
CABINETS (ALUMINIUM) |
5.0 |
| 1182 |
G.SD.113 |
EMRY POLISHING PAPER |
5.0 |
| 1183 |
G.SD.115 |
SILICON OIL SG9715214002 |
5.0 |
| 1184 |
G.SD.116 |
BLACK LAC.VARNI HY5710061018 |
5.0 |
| 1185 |
G.SD.117 |
CENTOPLEX D024 HY5710064040 |
5.0 |
| 1186 |
G.SD.118 |
SERVO SYS.OIL HY5710080020 |
5.0 |
| 1187 |
G.SD.119 |
TECTYLE 506 HY5710087017 |
5.0 |
| 1188 |
G.SD.120 |
SERVOGEM GREESE HY5740062204 |
5.0 |
| 1189 |
G.SD.121 |
RITZOL 7/2 HY5740064031 |
5.0 |
| 1190 |
G.SD.122 |
SEAL SG50008 SG50011 |
5.0 |
| 1191 |
G.SD.123 |
NUT SG90026001 SG90026002 |
5.0 |
| 1192 |
G.SD.124 |
PR0GRE.RING SG90026003 SG90026004 |
5.0 |
| 1193 |
G.SD.125 |
INSULATING PULL ROD ASSLY |
5.0 |
| 1194 |
G.SD.126 |
LINEAR TRANSDUCER & UNIVERSAL FIXTURE |
5.0 |
| 1195 |
G.SD.127 |
PLASTIC CONTAINER |
5.0 |
| 1196 |
G.SD.128 |
CB OPERATION ANALYSER KIT |
5.0 |
| 1197 |
G.SD.130 |
SEALING RING 45183001195 |
5.0 |
| 1198 |
G.SD.132 |
DERLIN WASHERS & BALLS 2153722-1 2153763-1 2211821-2 2152918-1 2211821-1 45133012050 |
5.0 |
| 1199 |
G.SD.133 |
MULTIPURPOSE CLEANER / DEGREASER |
5.0 |
| 1200 |
G.SD.134 |
SF6 GAS CIRCUIT BREAKER 145 KV & 245 KV |
5.0 |
| 1201 |
G.SD.135 |
FLEXIBLE COUPLINGS (TYRE TYPE) |
5.0 |
| 1202 |
G.SD.136 |
GEAR BOX |
5.0 |
| 1203 |
G.SD.137 |
COPPER TUNGSTON ARCING RINGS 45185001751, 45185005515, 45185006504 |
7.8 |
| 1204 |
G.SD.171 |
AIR CYLINDER |
5.0 |
| 1205 |
G.SD.185 |
CERAMIC TILES, VENTURI VANES, INNER CONES WITH TILES, CERAMIC PLUGS |
5.0 |
| 1206 |
G.SD.186 |
DELTA P PANELS |
5.0 |
| 1207 |
G.SD.201 |
NI-CR-AL-Y POWDER, YETRIA STABLISED ZIRCONIA POWEDER |
87.8 |
| 1208 |
G.SD.204 |
BODY GAS STOP VALVE, YOKE GAS S/R&C VALVE, HSG AND SUPPORT FOR STOP VALVE |
5.0 |
| 1209 |
H.SD.118 |
RIG ELECTRICS |
768.8 |
| 1210 |
IT.CO.010 |
PRECISION CASTINGS * KOMATSU HOWMET HY19592 |
5.0 |
| 1211 |
IT.FO.008 |
FORGINGS / FLANGES OF SPECIAL GRADE F91 |
26.0 |
| 1212 |
IT.SD.006 |
NON-ASBESTOS GASKET SHEETS |
12.6 |
| 1213 |
IT.SD.010 |
TRANSFLOW VALVES |
5.0 |
| 1214 |
IT.SD.015 |
S.S / PAPER FILTER CARTRIDGES. FOR 40/10 MICRONS FILTER ELEMENTS |
5.0 |
| 1215 |
IT.SD.016 |
DISCO NON - RETURN VALVES |
5.0 |
| 1216 |
IT.SD.017 |
NON-RETURN VALVE IN OIL VAPOUR EXTRACTION FAN EXHAUST (ALUMINIUM FLAP) |
5.0 |
| 1217 |
IT.SD.023 |
QUICK CLOSING EXTRACTION NON- RETURN VALVES (SINGLE FLAP) |
41.5 |
| 1218 |
IT.SD.025 |
TURBINE THERMAL INSULATIONS AND CLADDING |
257.0 |
| 1219 |
IT.SD.027 |
MULTI MEMBRANE COUPLING (HBS) |
5.0 |
| 1220 |
IT.SD.028 |
MAAG DRYFLEX COUPLING |
5.0 |
| 1221 |
IT.SD.029 |
GEAR COUPLINGS FOR MOP |
13.8 |
| 1222 |
IT.SD.030 |
3/2 & 2/2 WAY DIRECTIONAL VALVE HAND OPERATED / HYDRAULIC/ PNUEMATIC/ AC SOLENOID ACTUATION(EHBD)/ |
51.1 |
| 1223 |
IT.SD.035 |
THREE WAY BALL COCK |
5.0 |
| 1224 |
IT.SD.037 |
DAMPING DEVICE ( THROTTLE CUM NON RETURN VALVES ) |
6.2 |
| 1225 |
IT.SD.042 |
2/2 WAY SOLENOID VALVE FOR TURBINE EXHAUST SPRAY CONTROL |
11.8 |
| 1226 |
IT.SD.043 |
CONTROL VALVE ACTUATOR ( MOOG ) |
5.0 |
| 1227 |
IT.SD.045 |
OIL INJECTION PUMP |
5.0 |
| 1228 |
IT.SD.047 |
SEALING RING (CLOSED & OPEN) |
5.0 |
| 1229 |
IT.SD.049 |
BALL STUD |
5.0 |
| 1230 |
IT.SD.050 |
BEARING FOR MAIN OIL PUMP ( RADIAL ) |
5.0 |
| 1231 |
IT.SD.051 |
PROTECTION ROLLER BEARING (MAKE FAG, SKF, INA) |
5.0 |
| 1232 |
IT.SD.052 |
SKF MAINTENANCE FREE SPHERICAL PLAIN BEARING (MAKE FAG.SKF.INA) |
5.0 |
| 1233 |
IT.SD.053 |
DEVA BEARING |
19.4 |
| 1234 |
IT.SD.054 |
UNIVERSAL SPHERICAL SEATED BEARING (MAKE FAG. SKF.INA) |
5.0 |
| 1235 |
IT.SD.056 |
DU-BUSHES AND DU-WASHERS |
5.0 |
| 1236 |
IT.SD.057 |
MEGI-HL-BUSH |
5.0 |
| 1237 |
IT.SD.058 |
GROUNDING BRUSH |
44.6 |
| 1238 |
IT.SD.059 |
UPAT ANCHOR URA TYPE W ( ANCHOR BOLT ) |
5.0 |
| 1239 |
IT.SD.060 |
TILTING PAD JOURNAL BEARINGS, PADS, OIL SCRAPPER RINGS |
13.8 |
| 1240 |
IT.SD.061 |
TILTING PAD JOURNAL BEARINGS, PADS, OIL SCRAPPER RINGS |
141.2 |
| 1241 |
IT.SD.062 |
TILTING PAD JOURNAL BEARINGS, PADS, OIL SCRAPPER RINGS |
130.6 |
| 1242 |
IT.SD.063 |
KINGSBURY TYPE THRUST BEARING AND PADS |
19.8 |
| 1243 |
IT.SD.064 |
THRUST BEARINGS AND PADS |
5.0 |
| 1244 |
IT.SD.065 |
I/H CONVERTORS |
266.5 |
| 1245 |
IT.SD.069 |
COMPLETE BELLOWS FOR GOVERNOR (SR IV & SR III), HYDRAMEMBRANE BELLOWS |
5.0 |
| 1246 |
IT.SD.075 |
ADJUSTABLE CLAMPS |
5.0 |
| 1247 |
IT.SD.076 |
EXPANDER |
5.0 |
| 1248 |
IT.SD.077 |
THRUST RING |
5.0 |
| 1249 |
IT.SD.078 |
ACCUMULATOR & CHARGING UNIT FOR GOVERNING SYSTEMS ( PRIMARY OIL LINE, EHC ) |
5.0 |
| 1250 |
IT.SD.079 |
SPRIAL CASING, WEARING RING & IMPELLER FOR MOP |
5.0 |
| 1251 |
IT.SD.080 |
FILTER FOR SOLENOID VALVE FOR LOAD SHEDDING RELAY |
5.0 |
| 1252 |
IT.SD.085 |
LEVER JOINTING HEADS WITH EXTERNAL / INTERNAL THREADS |
5.0 |
| 1253 |
IT.SD.086 |
PLASTIC HAND WHEEL |
5.0 |
| 1254 |
C.IM.143 |
POLYETHYLENE SLEEVES |
5.0 |
| 1255 |
C.IM.144 |
TREATED SYNTHETIC FIBRE TAPE & TRIVOLTHERM |
5.0 |
| 1256 |
C.IM.146 |
TEFLON COATED EPOXY GLASS LAMINATED SHEET |
5.0 |
| 1257 |
C.IM.147 |
EPOXY GLASS LAMINATED SHEET (CLASS H) |
5.0 |
| 1258 |
C.IM.148 |
ZINC NAPTHENATE PRODUCT NO.90440 |
5.0 |
| 1259 |
C.IN.002 |
MERCURY IN STEEL DIAL THERMOMETRES |
5.0 |
| 1260 |
C.IN.004 |
VIBRATION PICK UP AS PER DRG. |
5.0 |
| 1261 |
C.IN.008 |
PRESSURE SWITCHES & DIFFERENTIAL PRESSURE SWITCHES |
5.0 |
| 1262 |
C.IN.009 |
ROTOR TEMPERATURE RECORDER |
5.0 |
| 1263 |
C.IN.010 |
ISOLATORS & LOAD BREAK SWITCHES OFFLOAD ISOLATORS/LOAD BREAK SWITCH VACUUM INTERRUPTOR |
5.0 |
| 1264 |
C.IN.013 |
INDICATORS (INPUTS 4-20 MA OR 0-20 MA) |
5.0 |
| 1265 |
C.IN.014 |
FIRE DETECTORS (FENWEL MAKE) CAT NO.27021-1 080 |
5.0 |
| 1266 |
C.IN.015 |
PRESSURE TRANSMITTER (EXPLOSION PROF) |
5.0 |
| 1267 |
C.IN.017 |
ROTOR EARTH FAULT RELAY |
5.0 |
| 1268 |
C.IN.028 |
U-TUBE MANOMETER |
5.0 |
| 1269 |
C.IN.031 |
NON-CONTACT TYPE VIBRATION PROBES |
5.0 |
| 1270 |
C.P.001 |
CHROME PLATING |
5.0 |
| 1271 |
C.PL.501 |
PLXI GLASS RINGS |
5.0 |
| 1272 |
C.RM.007 |
INSULATED COPPER ROUND CONDUCTORS V.BONDED DOUBLE GLASS LAPPED/ BRAIDED & ENAMELLED COPPER ROUND CON |
5.0 |
| 1273 |
C.RM.009 |
DAGLAS COPPER STRIPS |
5.0 |
| 1274 |
C.RM.011 |
I. SECTIONS (PROFILES) AA10112 |
5.0 |
| 1275 |
C.RM.016 |
COPPER SHEETS & BRASS SHEETS AA12028 AA12101 AA12102 |
5.0 |
| 1276 |
C.RM.020 |
PURE SILVER WIRE |
5.0 |
| 1277 |
C.RM.021 |
TIN SOLDER STRIPS |
5.0 |
| 1278 |
C.RM.022 |
BRIGHT STEEL STRIPS AA10112 |
5.0 |
| 1279 |
C.RM.023 |
COPPER ROUND (CU. CR. ZR) DIN 1782 |
5.0 |
| 1280 |
C.RM.027 |
COPPER FOIL |
5.0 |
| 1281 |
C.RM.029 |
INS. CU. FLEXIBLES (ROUND) |
5.0 |
| 1282 |
C.RM.030 |
VENTILATION SPACER DRG. |
5.0 |
| 1283 |
C.RM.031 |
SS NON MAGNETIC WIRE (TINNED) DIA 5 MM / HY10779 |
5.0 |
| 1284 |
C.RM.034 |
HEAT SINK PROFILE & ALUMINIUM FLATS |
5.0 |
| 1285 |
C.RM.037 |
LAMINATION SEGMENT |
5.0 |
| 1286 |
C.RM.039 |
ROTOR CU. SOLID (0.1% AG. BEARING) FOR HYDROGEN COOLED MACHINES |
5.0 |
| 1287 |
C.RM.040 |
CR. ZR. CU. BARS, RODS & CASTINGS |
5.0 |
| 1288 |
C.SD.002 |
D.C.MOTORS (LT) |
5.0 |
| 1289 |
C.SD.004 |
GENERATOR CONTROL DESK WITH MOSAIC TILES |
5.0 |
| 1290 |
C.SD.018 |
UAT (RESIN CAST COILS) IS11171 |
5.0 |
| 1291 |
C.SD.022 |
REGULATING VALVES (DIFL. PRESSURE REGULATORS) |
5.0 |
| 1292 |
C.SD.023 |
FLOAT VALVES |
5.0 |
| 1293 |
C.SD.027 |
NON METALLIC SLINGS |
5.0 |
| 1294 |
C.SD.028 |
4 WAY/3 WAY VALVES |
5.0 |
| 1295 |
C.SD.029 |
SEAL OIL PUMPS |
5.0 |
| 1296 |
C.SD.031 |
VACCUM PUMP TD22-0230 |
5.0 |
| 1297 |
C.SD.039 |
FLOW METERS |
5.0 |
| 1298 |
C.SD.041 |
GAS DRIER |
5.0 |
| 1299 |
C.SD.042 |
HAND LEVER PRESS |
5.0 |
| 1300 |
C.SD.043 |
TITE SEAL |
5.0 |
| 1301 |
C.SD.046 |
PTFE RINGS |
5.0 |
| 1302 |
C.SD.047 |
HYLOMAR (SO 32 M) |
5.0 |
| 1303 |
C.SD.051 |
HIIGH VOLTAGE STATOR BUSHINGS FOR GENERATORS |
5.0 |
| 1304 |
C.SD.052 |
LEAD THROUGH PLATE (H2 COOLED M/CS) |
5.0 |
| 1305 |
C.SD.053 |
MC SLEEVE M/C BUSHING |
5.0 |
| 1306 |
C.SD.054 |
DRY AIR BLOWER |
5.0 |
| 1307 |
IT.SD.081 |
SPRING LOADED CLAMPING RING |
5.0 |
| 1308 |
IT.SD.082 |
CYLINDER CLAMPING RING |
5.0 |
| 1309 |
IT.SD.083 |
BOLTS AND NUTS, ALLOY STEEL AND SCREWS |
5.0 |
| 1310 |
IT.SD.084 |
CLAMPING SLEEVES |
5.0 |
| 1311 |
IT.SD.087 |
VALVE STEM AND SEAT |
5.0 |
| 1312 |
IT.SD.088 |
PISTON RINGS |
5.0 |
| 1313 |
IT.SD.089 |
HYDRAULIC CYLINDERS |
17.1 |
| 1314 |
IT.SD.090 |
WOODWARD GOVERNOR PGPL |
5.0 |
| 1315 |
IT.SD.091 |
ASKANIA OIL HYDRAULIC JET PIPE CONTROLLER |
5.0 |
| 1316 |
IT.SD.092 |
SPEEDER GEAR MOTOR ( DC VOLTAGE) |
5.0 |
| 1317 |
IT.SD.093 |
SPEEDER GEAR MOTOR (BRAKE TYPE) |
5.0 |
| 1318 |
IT.SD.094 |
JET SPRAY NOZZLE |
5.0 |
| 1319 |
IT.SD.095 |
POWDER FOR INSULATING WASHERS |
5.0 |
| 1320 |
IT.SD.096 |
LEAD PLATE 250 |
5.0 |
| 1321 |
IT.SD.097 |
LOCTITE COMPOUND, LOCTITE SUPERFLEX RED |
5.0 |
| 1322 |
IT.SD.098 |
HYLOMAR PASTE |
5.0 |
| 1323 |
IT.SD.099 |
BIRKOSITE |
5.0 |
| 1324 |
IT.SD.101 |
TECTYL 505 |
5.0 |
| 1325 |
IT.SD.103 |
DIAPHRAM COUPLINGS |
5.0 |
| 1326 |
IT.SD.105 |
POSITION TRANSMITTER FOR CONTROL VALVES |
19.0 |
| 1327 |
IT.SD.107 |
PROXIMITY SWITCH FORTRIPPING DEVICE |
5.0 |
| 1328 |
IT.SD.108 |
CRIMP CONTACTS, COMPLETE CONNECTOR ASSEMBLY HAN15D |
5.0 |
| 1329 |
IT.SD.109 |
LINE UP TERMINAL |
5.0 |
| 1330 |
IT.SD.110 |
GLC POSITION TRANSMITTER (COLLIN PICK UP) FOR SPEEDER GEAR |
5.0 |
| 1331 |
IT.SD.111 |
MOVING COIL |
5.0 |
| 1332 |
IT.SD.112 |
END PLATE / END ANGULAR PLATE |
5.0 |
| 1333 |
IT.SD.113 |
SUPPORT BAR |
5.0 |
| 1334 |
IT.SD.115 |
SILICONE CABLE WITH SPECIAL INSULATION |
5.0 |
| 1335 |
IT.SD.116 |
CLAMPING SCREWS WITH EARTHING SLEEVE |
5.0 |
| 1336 |
IT.SD.117 |
CLAMP WITH WIRE PROTECTION |
5.0 |
| 1337 |
IT.SD.118 |
CABLE CONNECTOR & ANGLE CONNECTOR |
5.0 |
| 1338 |
IT.SD.119 |
ECLIPSE TOP MAGNET (BARREL TYPE MAGNET) |
5.0 |
| 1339 |
IT.SD.120 |
LIMIT SWITCH (INDUCTIVE TYPE) FOR STARTING DEVICE |
5.0 |
| 1340 |
IT.SD.122 |
SWIVELL BANJO CONNECTOR |
5.0 |
| 1341 |
IT.SD.123 |
NIPPLE FOR QUICK CLOSING COUPLING (BRQ. HOUSING) |
5.0 |
| 1342 |
IT.SD.126 |
UNIVERSAL CABLE GLAND, ANGLE CONNECTOR |
5.0 |
| 1343 |
IT.SD.127 |
TURNING GEAR REVERSING SWITCH |
5.0 |
| 1344 |
IT.SD.128 |
ALUMINIMUM JUCTION BOXES/ HOUSING |
5.0 |
| 1345 |
IT.SD.129 |
BINDING TAG, BINDING TAPE, CABLE BINDER |
5.0 |
| 1346 |
IT.SD.130 |
LUBRITE SLIDING PLATES / WASHERS ( * FORMERLY OILS CORPN. THROUGH MITSUI, JAPAN ) |
5.0 |
| 1347 |
IT.SD.132 |
PRESSPAN PACKING |
5.0 |
| 1348 |
IT.SD.134 |
TITANIUM PUTTY |
5.0 |
| 1349 |
IT.SD.137 |
SPHERICAL WASHER |
5.0 |
| 1350 |
IT.SD.138 |
CONICAL SEAT |
5.0 |
| 1351 |
IT.SD.145 |
PLUG PIPE THREADED |
5.0 |
| 1352 |
IT.SD.146 |
BELLOWS FOR PROTECTIONS (HYDRA MEMBRANE BELLOWS 22) |
5.0 |
| 1353 |
IT.SD.147 |
CARBON RINGS |
5.0 |
| 1354 |
IT.SD.148 |
FLEXIBLE ELEMENT ASSEMBLY |
5.0 |
| 1355 |
IT.SD.149 |
GOVERNING OIL FILTER ELEMENT (PLATE TYPE OIL FILTERS INSERTS), SELF CLEANING FILTER ( GOVERNING OIL |
5.0 |
| 1356 |
IT.SD.152 |
ELECTRONIC GOVERNOR (EHTC) |
24.7 |
| 1357 |
IT.SD.153 |
MAGNET FOR MAGNETIC WHEEL |
5.0 |
| 1358 |
IT.SD.154 |
NOZZLE SEGMENT |
5.0 |
| 1359 |
IT.SD.155 |
8 PIN CONNECTOR TYPE BKS |
5.0 |
| 1360 |
IT.SD.156 |
ROD PROBE |
5.0 |
| 1361 |
IT.SD.158 |
SOCKET HARTING STAF-6 CONNECTOR ASSEMBLY |
5.0 |
| 1362 |
IT.SD.159 |
STELLITED VALVE |
5.0 |
| 1363 |
IT.SD.160 |
THROTTLE VALVE (EHBD) |
5.0 |
| 1364 |
IT.SD.162 |
VALVE SPINDLE (LC-IB COATED) AND VALVE CONES |
5.0 |
| 1365 |
IT.SD.171 |
SS METAL HOSES |
5.0 |
| 1366 |
IT.SD.175 |
SPRING LOADED NON RETURN VALVE FOR JACKING OIL SYSTEM |
5.0 |
| 1367 |
IT.SD.178 |
DIVERTER VALVES |
5.0 |
| 1368 |
IT.SD.180 |
HYDRO PACK HAND PUMP FOR WATERMEDIA WITH 10 LIT RESERVOIR CAP AND 0-500 KG / SQ.CM. |
5.0 |
| 1369 |
IT.SD.181 |
ENERPAC OIL INJECTION EQUIPMENT |
5.0 |
| 1370 |
IT.SD.184 |
REVERSING SWITICH |
5.0 |
| 1371 |
IT.SD.186 |
HOSE CLAMP |
5.0 |
| 1372 |
IT.SD.188 |
LIFTING LUGS |
5.0 |
| 1373 |
IT.SD.191 |
DAMPING DEVICE |
5.0 |
| 1374 |
IT.SD.192 |
VIBRATION ISOLATION SYSTEM |
5.0 |
| 1375 |
IT.SD.193 |
BOLT HEATING EQUIPMENT |
62.1 |
| 1376 |
IT.SD.195 |
HIGH DENSITY BALANCING SCREWS |
5.0 |
| 1377 |
IT.SD.196 |
ANGULAR PIPE UNION |
5.0 |
| 1378 |
IT.SD.197 |
2/2 WAY SOLENOID VALVE (EXPL. PROOF FOR JET SPRAY CONTROL) |
5.0 |
| 1379 |
IT.SD.202 |
CAST STEEL SHOT |
5.0 |
| 1380 |
IT.SD.203 |
LEAD SHEET |
5.0 |
| 1381 |
IT.SD.204 |
TURBINE OIL CLEANING SYSTEM |
5.0 |
| 1382 |
IT.SD.210 |
BRUSH SEALS |
411.8 |
| 1383 |
IT.SD.213 |
VIBRO FINISHING CHEMICAL & MEDIA |
5.0 |
